• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. C

    What did you do to your deuce this week?

    We have property in the Pacific Northwest and I will be taking Deuce 2 out there so want to be able to start in the negative temp range. Deuce 1 has its flame heater deleted as it will live in Florida, speaking of flame heater, I was sold this replacement spark plug with a different part...
  2. C

    What did you do to your deuce this week?

    More work on Deuce 2… Replaced 6 fuel injectors, new copper washers and new rubber injector seals Replaced fuel Injector return line to include all new fittings Replaced primary fuel filter Replaced fuel tank to primary filter head hose Replaced hose from primary fuel filter head to injection...
  3. C

    What did you do to your deuce this week?

    Finally finished a large serving on Deuce 2 to include: 6 new inner hub seals 4 new outer axle seals 2 new front axle tube seals 6 new axle lock washers 6 new brake cylinders and associated banjo bolts, washers, etc. All new rubber brake lines 4 new hard lines on front and center axle Power...
  4. C

    What did you do to your deuce this week?

    I picked up a second Deuce, a 1971 Kaiser M35A2 WO/W from a member on this site a few months ago and have been slowly making my way through it. So far I have: Replaced the air governor Replaced almost all injection pump fuel lines (1 more to go) Greased all points in the LO (with the exception...
  5. C

    What did you do to your deuce this week?

    Oil change completed today! Going into 2023 caught up on the basic maintenance. I’ve noticed my spin on oil filter closest to the cab always seems mostly dry when doing an oil change. Is this normal or common with the spin on filter kits?
  6. C

    What did you do to your deuce this week?

    I replaced all 3 spin-on fuel filters today. Last month I replaced both rear drivers side axle seals and did a minor break adjustment. Now my rear drum no longer runs hot.
  7. C

    What did you do to your deuce this week?

    Changed oil and filters with a quart of Opti-LUBE ZDDP oil fortifier. Trying out NAPA 15w-40 oil I picked up on sale a while back.
  8. C

    What did you do to your deuce this week?

    Add a new throttle return spring to the list for this week! I think the old one was tired and not correct.
  9. C

    What did you do to your deuce this week?

    During the past 2 weeks I’ve worked on sanding and painting my fuel tank mounts and straps as well as sourcing a NOS fuel tank and new in-tank fuel pump. I completed the install today after tapping 5 un-threaded fuel pump mounting holes. The tank also got a NOS fuel sender and a new fuel cap.
  10. C

    What did you do to your deuce this week?

    Replaced 2 fan belts this morning on my truck, after a nice test drive the low needle on the volt gauge is no longer low. The existing belts were at max adjustment; otherwise, I think a tightening would have got her back in the green.
  11. C

    What did you do to your deuce this week?

    Replaced an overly worn passenger seat and greased the throw out Bearing shaft. Also aired up all tires to 50psi.
  12. C

    What did you do to your deuce this week?

    Topped off brake fluid today after replacing brake light light switch. I also replaced a bad flasher module. Now I have brake lights and turn signals again! I finished the morning off with an hour cruise...
  13. C

    What did you do to your deuce this week?

    Here is a comparison to NOS.
  14. C

    What did you do to your deuce this week?

    In the process of replacing shocks, I wire brushed and painted the mounts so I’m on an extended break until the paint dries. These mismatched shocks have seen better days…
  15. C

    What did you do to your deuce this week?

    I just received the compressor wrenches I ordered from you, they look great, can't wait to use 'em!
  16. C

    What did you do to your deuce this week?

    I dont have a picture, but I have the primary kit a lot of other members use in this link: Spin On Filter Kits It's an adapter that screws into where the standard mounting bolt would hold on the filter can, and the spin on mounts onto that.
  17. C

    What did you do to your deuce this week?

    This weekend I replaced the 3 spin on fuel filters on my Deuce, the whole process was not too bad and luckily my in-tank pump is working so priming was a breeze.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks