Search results

Finally got around to installing my tow bar bracket on the wrecker.

Finally got around to putting the 395s on the wrecker. Changed out the 11.00s even though they were like new singles just look better.

Put her to work today bringing my new to me Freightliner project home.

I picked up the scissor hoist used for $200. I had to modify it some just fab work. It works great no leaks.

I got everything cheap and hydraulic hose shop made all my hoses up at cost. I have about $350 in valves and blocks another $175 in 3 dual port relief valves and about $300 in all my fittings and hoses. You would have less if you just wanted a winch and dump bed but I ran a third valve for a...

Don't worry I have had them for months and just finally got around to it. Sometimes life just gets in the way and the truck projects just sit. Next is some paint work on the bed and install my knuckle crane that I have had for 2 years now.

Yes they are single station D05 size valves. I got a great deal one them and single subplates so I went that route instead of a manifold.

Got around to installing my electric control valves for the hydraulics that way I have my winch control, dump bed, knuckle crane (needs installed) and an auxiliary line. I wanted to run everything off the trucks PTO. I have two more custom switches coming

I did this and works great on tractors.

Installed a new Purair dryer from an mrap. And had a perfect working ctis until the other day I got 5 flashing lights. I tracked it down to the air hoses on the intermediate axle and replaced those. She's good as new now!!!!

I managed to get the bed welded together and the sides on it it so I can start welding them up.

I cut down my bed to 10'1" for my m932a2. Now all I got left is weld it up and paint.

I will get pictures of that tonight. I put a filter setup under the hood that's plumbed in line with the original pipe. It's a K&N for large diesels

I installed a 25 gallon hydraulic tank on my m932a2 for additional hydraulics I plan on in the future.

No I didn't take any sorry.

Installed my bridge plate and winch brackets and winch on my 931a2