Search results

Go to S10. Is it in the normal, (run) position? If not, place it in the correct position. If so, go to S17. Is it pulled out? If not, pull it out. If its pulled out, go to CB-1. Test to both terminals to see if you have 24 VDC. Got voltage? Then go back to S17. Test to see if you have 24...

30A Batt Charging Fuse. Fuse NSN: 5920-00-539-6920 So no, that is not the right fuse. Check the -24P for parts you need. Just because you wired the new Alternator up the same way the old one was, is not reason to believe its wired right. If you...

I plugged the part number in the U.S. Ebay and found your UK listing, and if you go farther down, you will find some in the states. Remember, 30 Amp, 250 volt. I bet if you plugged in the NSN for the fuse, it would come up also. We need to get you up to speed using the TM's. Also, look very...

This is a easy test. I think its wires 1&3 on the A1? Shooting from memory here. Disconnect them and take your readings.

I think you need to start with checking your A1, volt regulator. You had a 30 amp fuse in it, instead of a 3 amp fuse. If the A1 is bad, it could burn up the excitation stater. To check the F1 and F2 on the excitation stater, you can ohm it out. Right now I can not get at my TM's and stuff...

Good. But you need to now read up on testing the Quad circuit. If you need help finding it, say something. I am on my way now to do some work for the kids. Be back later today.

Thats a 3 amp fuse, and that would be the right size. I never put a lot of stock on it being slow or fast blow.

Check again. Its supposed to be a 3 amp slow-blow, not a 30 amp.

Do you have this MWO on your set.

Have you downloaded all the TM for this gen set. What other thread do you mean? There are about a billion "other threads". At the age of 67, I have problems remembering my own name.

Place marker till i get back home.