Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Ran Gen for 30 mins.
Charger working
water temp working.
Hour meter working. 317 hours but it is a stewart warner gage. dont know if it was replaced.
Had leak at the IP and need new washer.
No oil leaks
No water leaks
160 degrees max water temp
45 psi oil pressure.
Kris
Hip Hip Ho ray!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The severed ground wire was one of the reasons it did not start.
I fired it off and she ran on her own.
Next is to address the lights bulbs per instructed.
Kris
Update:
Found the ground wire problem.
The wire going to J5 what looks like it was cut in two. It was under three zip ties so impossible to see unless you cut off the zip ties, which I did.
So I will put a wire connector on the wire and retest continuity first and then try to start the gen.
This...
Ok
But I don't know where P5 is at so I will have to take the SP box out and find it because it is marked inside the box.
Then start trouble shooting. My assistant has the wrench to take off connectors so I'm screwed for tonight.
Kris
No I have not replaced the lights yet but I will try to buy them tomorrow.
Also there is one of the panel lights out.
I can change out the unimportant lights to the important lights in the mean time if you can tell me.
Only two lights are burned out.
Kris
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!