Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Not a member there, I will give that site a try. The switching valve is indeed on the suction side, mounted on the bellhousing. Took it apart and found that the tapered valve is a tad scored and the top seal is almost non existent. I believe I can repair the valve. Worst case for the strainers...
No good pic, It was pouring and I left early. They are mounted on the pick up tubes in both tanks, apx 1/2 diameter hole in the brass ends, the pick up tube runs through the screen. Held on the pick up by a cotter pin. They are apx 3 inches tall x 1 1/4 in diameter.
I'll see if Craig can take...
HELP!! Getting the carrier up and running is requiring some parts. FP looses prime, no adjustment on the idle circuit on the carb and the filter is full of.....stuff.
Got the fuel pump part handled, Then and Now put together a nice kit, Got a carb kit on the way from The Carburetor Shop.
One...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!