Search results

So, have you gotten an estimate from this diesel place? Prices can shoot up quickly. I would think you'd be better off buying an ip off ebay or from a reputable dealer like White Owl or Boyce equipment. Off the cuff, it sounds like the front half of you ip is toast.

Yes. A member or two here are selling the hydraulic head Oring sets for a very reasonable price, cant think of who it is right now though.

Put new fuel filters in it. Have you tried draining them? Might be water in the fuel too.

I hate to say it, it will not be the air filter. Sounds like your button retaining clip might have fallen off. I urge you to pull the Hyd head before doing anything else. I have seen the buttons destroyed from being hammered after they fall off. If it is just that it fell off, a new retaining...

Sometimes all it takes is pulling the cover and pushing the rod back and forth. I'd try that before spraying anything.

Adding a link to the part numbers! http://www.steelsoldiers.com/showthread.php?74508-Need-Part-IP-Pump-Hydraulic-Head-Ring-Clip-needed-to-hold-button-on-rod

Sometimes they get crud in there and you might have to take it apart to clean it up. You might be able to see in the second pic the rust I had to clean up. If you need to disassemble the rod for cleaning make sure you scribe the pieces before disassemble. Also take a lot of pictures. The pieces...

Steps to follow. 1 - Disconnect batteries 2 - Remove side cover from IP 3 - Remove "Jesus" clip from fuel control rod - Do Not loose 4 - Disengage the fuel control rod 5 - Cut and remove safety wire 6 - Remove two screws and metal bridge 7 - Carefully pry out the shutoff rod - DO NOT loose the...