Search results

Been cleaning up the electrical on the M1009. Removed the Dixie horns and all the wiring that went with them. Tested the glow plugs and the push button to activate them. Took out about 20 feet of extra wire and cable the PO had installed. Pulled the instrument cluster cleaned up connections and...

One side of the fuel door hinge broke off, loosened up the fill pipe which allowed it to slide over to remove the door. Heated up the hinge pin clamp to open it up to remove the pin , fabricated another small part and welded it in. blasted, primed and paint and reassembled.

Rebuilt the front calipers, replaced brake hoses and bleeders. Replaced rear brake cylinders, retension springs,made up new metal lines and replaced rear hose, also small line from proportioning valve to rear hose connection. I had trouble forming the short bends at the valve so for now I...

Installed FM 100 fuel filter. Got it from Gimpyrobb , put it all together on the bench with a thumbscrew bleed valve and hose. Used a piece of one inch square tubing between filter housing and the fire wall. Disconnected the noise supressors from the wiper motor and plugged the harness in...

Had my heater recored and put it back together today.

I removed my heater core, connected the hoses together with a 3/4 to 5/8 connector so minimal loss of coolant and still can drive it. I will take the core to the local radiator shop and have it rebuilt.