Search results

With my other winder mech the window went right down no glass showing.With this new one the window don't go down far enough to release the inside tailgate handle.

Tried fitting a new tailgate window winding mech.Bleddy Chinese can't even measure the length of the winder T piece.It's that long the outside handle won't even close into the clips.The window won't even wind all the way down. Still have a inch of glass still poking out.The arms are at the end...

I don't know where to get a replacement.I got mine repaired by a electronics wizard.I got it repaired after about 3 years of not having it fitted.

It's located under the dash in the drivers footwell up near the handbrake fitting.In a black plastic box with 4 wires coming off it.There is a small press catch on one side of it.Press it in and pull the box away from the plug.Then there are 2 side catches in the box with the card in. That...

Got my glow plug card repaired and low coolant card repaired.

Replaced front left hand side fender and inner fender also the right hand inner fender.While changing the right hand inner fender. I found the slave start pos cable had rubbed through to the copper and was touching the battery tray.I wondered why I was having electrical probs.If I were you all I...

Rebuilt my transmission.When i got it apart,one set of clutch packs were shot.No wonder i had no reverse and slipping top gear.

Not a lot......but i did sneak out and buy a 1957 M35a2:D

Only thing i can say is chief,it took me about 45 mins to do.The most time consuming thing was getting the old bushings out on each end.I just cut the rubber off on one side of each old bushing and pushed then out with a vice and socket.The new ones are the 3 piece bushings from LMC.Didn't even...

New sway bar bushings fitted,front r/h hand bottom fender splash guard,driver's and passenger's outside window rubbers.