• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. T

    What have you done to your 5 ton this week?

    I moved my filth wheel back so I could pull a pup box trailer home this week ,
  2. T

    What have you done to your 5 ton this week?

    I used the gin poles on my M52a2 to turn a trailer over to work on it they scope out another 8 feet and pin .
  3. T

    What have you done to your 5 ton this week?

    I started taking my park brake on my M52a2 apart to replace the drum shoes and check how true every turns .The drum must have had a damaged spot or high spot that would hit the drum after I adjusted it .
  4. T

    What have you done to your 5 ton this week?

    M52A2 washed inside and out
  5. T

    What have you done to your 5 ton this week?

    Today I added the extension to the PTO lever for the front winch in my m52a2 it swivels to go under the seat when not in use I put the extension on the transfer case last year it works great no more reaching to the floor when shirting . also cut the front winch cable in half 90 feet works fine .
  6. T

    What have you done to your 5 ton this week?

    No I plan on just using it for parts .
  7. T

    What have you done to your 5 ton this week?

    Unloaded the trailer axles I brought home last week end Off of the m269. I used axle clamps and a tow bar hooked to the back of my M211.
  8. T

    What have you done to your 5 ton this week?

    Picked up some free parts today I'm not sure what military trailer they come off of . I know the wheel cylinders brake shoes and drums will fit the M52a2 and M131A5C tanker trailer . The man said he tried to take them to the land fill they refused because the tires where on rims he went to the...
  9. T

    What have you done to your 5 ton this week?

    Picked up my M52a2 at the ATHS truck show
  10. T

    What have you done to your 5 ton this week?

    I switch out the box seat in my M52a2 with a springer seat from a m816 and I wanted more room .I removed the round rod that supports the lower back and added a strap across the back that supports the two plywood panels that seat inside the frame of the seat . I used the pad from the back of the...
  11. T

    What have you done to your 5 ton this week?

    Had to change out a leaking oil filter housing on my 1967 M52a2 that I repowered with a Mack 673p a few years ago .
  12. T

    What have you done to your 5 ton this week?

    For me mig welding when inside the flux core is best but outside the solid core is best just a small breeze blows the shielding gas away . Thanks for the pictures of your build.
  13. T

    What have you done to your 5 ton this week?

    Replaced one axle boot with non zippered boot on my M52A2 axle seal was also replaced. I made this tool and it worked good it made the drum and hub easy to slide on and off and spin the hub when adjusting the bearings it stopped the hub from turning when tightening the bolts on the drive flange .
  14. T

    What have you done to your 5 ton this week?

    I bought them from a salvage yard . They where on a roll off trash truck .
  15. T

    What have you done to your 5 ton this week?

    Finished the rear fenders on my M52a2 .It will give me a place to walk and stand when hooking up to a trailer or pulling the winch line .
  16. T

    What have you done to your 5 ton this week?

    I started mounting some rear fenders on my M52a2 I picked these up a few years ago they looked ok . I found out there is nothing square or level about them .I made my mounts square to the frame on the truck and ajusted the fender to fit . My fuel pump quit in my pole truck so I had to...
  17. T

    What have you done to your 5 ton this week?

    The fitting on the transmission is where the air vents from shifting in and out of reverse nothing connects to it . nice work .
  18. T

    What have you done to your 5 ton this week?

    Removed the steering relay lever from my M52a2 and replaced the bushings seals and a new pin . about $60 .
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks