• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

T815 TP24 6x6 Adventure / TrialTruck Build Project

T815-8x8

Member
79
0
6
Location
Bozman MT
ImageUploadedByTapatalk1428195249.980857.jpg
ImageUploadedByTapatalk1428195273.996755.jpg

Focusing on the engine right now, this is the DD 8v92ta I purchased from GovLiquidation, missing a few parts but really good engine very few hours

ImageUploadedByTapatalk1428195387.890532.jpg
ImageUploadedByTapatalk1428195403.024277.jpg
ATTACH]552036[/ATTACH]

Stripped it down to short block, had to replace front block plate, replace missing front cam bearings, de glaze hone cylinders, check liner depth all perfect within 0.002"
ImageUploadedByTapatalk1428195515.400318.jpg
 

Attachments

T815-8x8

Member
79
0
6
Location
Bozman MT
Bleach out photo, but this is current status of the TP24, chassis stripped down, 12" cut from rear frame rails reduce departure angle, initial steam clean, full air system & electrical harness removed.

ImageUploadedByTapatalk1428196037.511638.jpg
 

T815-8x8

Member
79
0
6
Location
Bozman MT
ImageUploadedByTapatalk1432494565.939532.jpgImageUploadedByTapatalk1432494584.441391.jpg

Back to the truck, last minute decision after securing use of GN trailer 3Pm Friday started loading the Tatra for transport to my house in Lincoln MT, loading driving through the night then unloading a no brakes 19000lb rolling chassis wasn't easy but got done by 11AM Saturday morning, so now it's sits at its new home where the rebuild will continue. I'm going to have to build a concrete pad then add roof & 1 side as a temp structure.

ImageUploadedByTapatalk1432494663.797351.jpg
ImageUploadedByTapatalk1432494677.082358.jpg
ImageUploadedByTapatalk1432494690.133416.jpg
ImageUploadedByTapatalk1432494737.204226.jpg
 

T815-8x8

Member
79
0
6
Location
Bozman MT
The week previous I had removed the Tatra 10sp gearbox, after looking at size of gears shafts & bearings realized I could use this for power transmission from the Allison just by keeping it blocked in 10th gear ( 5th high split) = 0.71 OD ratio remove all other unused gears. Problem I found on removal worn out spline engagement between Output shaft of box & Input shaft of TC this was caused by worn & collapsed bearing on both shafts. I will need both shafts and replace all bearings in the box and relevant input bearings of TC


ImageUploadedByTapatalk1432494815.476928.jpg
ImageUploadedByTapatalk1432494835.445865.jpg
ImageUploadedByTapatalk1432494856.414385.jpg
ImageUploadedByTapatalk1432494874.199889.jpg
ImageUploadedByTapatalk1432494891.233303.jpg
ImageUploadedByTapatalk1432494908.701680.jpg
 

T815-8x8

Member
79
0
6
Location
Bozman MT


Tatra at my new shop in Lincoln MT

DD 8v92T / Allison HT740D getting close to bench test & install






Sent from my iPhone using Tapatalk
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks