Page 4 of 4 FirstFirst 1 2 3 4
Results 31 to 37 of 37

Thread: G506 Class 525 (G7133) restore

  1. #31
    4 Star General jeffhuey1n's Avatar
    Join Date
    Mar 2010
    Location
    Laramie County, Wyoming
    Posts
    1,057
    Thanks
    764
    Thanked 561 Times in 261 Posts

    Default

    Finally all the bumper repairs are finished. I’m not going to get too crazy, a few non structural dents and dings will remain. I’ve temp installed it for now. I’ll use it to support the front end while I clean up the front axle. Quite a change to the front end compared to the first pictures.
    Attached Images Attached Images
    3 each M35A2's 2 WO/W, 1 W/W:
    1972 M35A2 WO/W “Toys For Tots”, aka “Armadillo”
    1972 M35A2 WO/W “Tribute to Lt Col Ken Bourland”, aka “Warthog”
    1970 M35A2 W/W “War Wagon”, Vietnam War Gun Truck Tribute
    1 each M59 gasser dump truck
    2 each M211's 1 W/W, 1WO/W
    1 each M52A2 tractor
    1 each M1009
    1 each M37, with Dodge poly 318, hydraulic clutch
    1 each G506 Fire truck
    USMC/USAF

  2. #32
    4 Star General jeffhuey1n's Avatar
    Join Date
    Mar 2010
    Location
    Laramie County, Wyoming
    Posts
    1,057
    Thanks
    764
    Thanked 561 Times in 261 Posts

    Default

    One of the items I’m missing is a set of the original two hooks. I hope someone out there has a set they’re interested in doing a swap for?
    3 each M35A2's 2 WO/W, 1 W/W:
    1972 M35A2 WO/W “Toys For Tots”, aka “Armadillo”
    1972 M35A2 WO/W “Tribute to Lt Col Ken Bourland”, aka “Warthog”
    1970 M35A2 W/W “War Wagon”, Vietnam War Gun Truck Tribute
    1 each M59 gasser dump truck
    2 each M211's 1 W/W, 1WO/W
    1 each M52A2 tractor
    1 each M1009
    1 each M37, with Dodge poly 318, hydraulic clutch
    1 each G506 Fire truck
    USMC/USAF

  3. #33
    4 Star General jeffhuey1n's Avatar
    Join Date
    Mar 2010
    Location
    Laramie County, Wyoming
    Posts
    1,057
    Thanks
    764
    Thanked 561 Times in 261 Posts

    Default

    No much to report. I’ve been doing the hunt for hardware. I’ve got hundreds if not thousands of bits and pieces of hardware. Boxes, cans, trays, old peanut butter containers, you name it. It takes a while to find what I need.
    3 each M35A2's 2 WO/W, 1 W/W:
    1972 M35A2 WO/W “Toys For Tots”, aka “Armadillo”
    1972 M35A2 WO/W “Tribute to Lt Col Ken Bourland”, aka “Warthog”
    1970 M35A2 W/W “War Wagon”, Vietnam War Gun Truck Tribute
    1 each M59 gasser dump truck
    2 each M211's 1 W/W, 1WO/W
    1 each M52A2 tractor
    1 each M1009
    1 each M37, with Dodge poly 318, hydraulic clutch
    1 each G506 Fire truck
    USMC/USAF

  4. #34
    4 Star General m1010plowboy's Avatar
    Join Date
    Jan 2010
    Location
    Edmonton, Canada
    MVPA
    33518
    Posts
    2,865
    Thanks
    4,197
    Thanked 3,527 Times in 1,451 Posts

    Default

    How easy was it coming apart? Just wondering if that truck saw the same maintenance and rust protection other firetrucks would see when she was working. I love the idea of keeping it as a firetruck. You're gonna have some fun water fights with her. Thanks for the updates, it's a dream truck so I'll be looking for a ride.

  5. #35
    4 Star General jeffhuey1n's Avatar
    Join Date
    Mar 2010
    Location
    Laramie County, Wyoming
    Posts
    1,057
    Thanks
    764
    Thanked 561 Times in 261 Posts

    Default

    Quote Originally Posted by m1010plowboy View Post
    How easy was it coming apart? Just wondering if that truck saw the same maintenance and rust protection other firetrucks would see when she was working. I love the idea of keeping it as a firetruck. You're gonna have some fun water fights with her. Thanks for the updates, it's a dream truck so I'll be looking for a ride.
    . So far I’ve only had to cut off 4-5 clutch type screws with two having to get the head cut off (one in each wheel well) there’s quite a bit of surface rust but nothing really considered bad, no rust through anywhere on the frame or cab. The worst thing is all the red and white paint. Getting it off isn’t that hard but it’s making one heck of a mess! I’ve finally got the front bumper fully installed. Next on the agenda is pull the front shocks, support the frame and pull the front axle. The drive shafts are dirty but the bolts off the rear driveshaft came off real easy. The springs are getting disassembled to get all the red paint off as well. I hope to have it set for it’s debut on Armed Forces Day. The only slow down will be repainting the Toys For Tots truck. It’s looking a bit sad. Almost forgot, if working one one of these old warriors, you have to have a ful set of the clutch type bits. So far the largest I’ve found is 5/16” with the smallest being 3/16”. I wasn’t able to find the larger bits in town fit found a set on-line for $20.
    Last edited by jeffhuey1n; 02-12-2019 at 21:41.
    3 each M35A2's 2 WO/W, 1 W/W:
    1972 M35A2 WO/W “Toys For Tots”, aka “Armadillo”
    1972 M35A2 WO/W “Tribute to Lt Col Ken Bourland”, aka “Warthog”
    1970 M35A2 W/W “War Wagon”, Vietnam War Gun Truck Tribute
    1 each M59 gasser dump truck
    2 each M211's 1 W/W, 1WO/W
    1 each M52A2 tractor
    1 each M1009
    1 each M37, with Dodge poly 318, hydraulic clutch
    1 each G506 Fire truck
    USMC/USAF

  6. The Following User Says Thank You to jeffhuey1n For This Useful Post:

    m1010plowboy (02-14-2019)

  7. #36
    4 Star General jeffhuey1n's Avatar
    Join Date
    Mar 2010
    Location
    Laramie County, Wyoming
    Posts
    1,057
    Thanks
    764
    Thanked 561 Times in 261 Posts

    Default

    Got the hood off, the front shocks, frame mounted axle bumpers and steering link. The steering link was a real pain. The grease inside turned super hard and did not want to let go. But, I won and got it removed. I’ll probably have to soak it in cleaning fluid for a while.
    Last edited by jeffhuey1n; 02-17-2019 at 10:09.
    3 each M35A2's 2 WO/W, 1 W/W:
    1972 M35A2 WO/W “Toys For Tots”, aka “Armadillo”
    1972 M35A2 WO/W “Tribute to Lt Col Ken Bourland”, aka “Warthog”
    1970 M35A2 W/W “War Wagon”, Vietnam War Gun Truck Tribute
    1 each M59 gasser dump truck
    2 each M211's 1 W/W, 1WO/W
    1 each M52A2 tractor
    1 each M1009
    1 each M37, with Dodge poly 318, hydraulic clutch
    1 each G506 Fire truck
    USMC/USAF

  8. The Following User Says Thank You to jeffhuey1n For This Useful Post:

    m1010plowboy (02-14-2019)

  9. #37
    4 Star General jeffhuey1n's Avatar
    Join Date
    Mar 2010
    Location
    Laramie County, Wyoming
    Posts
    1,057
    Thanks
    764
    Thanked 561 Times in 261 Posts

    Default

    Nothing new on the truck today. I needed to clean the parts washer. It’s been a looong time since I used it. Yuck, ick, barf... it’s now cleaned up but I’ll need another can of parts cleaner so I have enough to use the pump. The steering link is sitting in the remaining fluid in hopes it’ll come clean after soaking for a while. Almost ready to pull the front axle. 4 U-bolts and the forward drive shaft will be coming off next.
    3 each M35A2's 2 WO/W, 1 W/W:
    1972 M35A2 WO/W “Toys For Tots”, aka “Armadillo”
    1972 M35A2 WO/W “Tribute to Lt Col Ken Bourland”, aka “Warthog”
    1970 M35A2 W/W “War Wagon”, Vietnam War Gun Truck Tribute
    1 each M59 gasser dump truck
    2 each M211's 1 W/W, 1WO/W
    1 each M52A2 tractor
    1 each M1009
    1 each M37, with Dodge poly 318, hydraulic clutch
    1 each G506 Fire truck
    USMC/USAF

Page 4 of 4 FirstFirst 1 2 3 4

Similar Threads

  1. G506 radiator?
    By racerlee in forum CCKW
    Replies: 2
    Last Post: 06-30-2013, 23:54
  2. G506 questions
    By moose97 in forum CCKW
    Replies: 26
    Last Post: 01-09-2013, 22:58
  3. 44 G506 value
    By johnnylazer in forum CCKW
    Replies: 5
    Last Post: 02-12-2010, 17:51
  4. new g506 toy
    By woodwalker in forum CCKW
    Replies: 5
    Last Post: 11-01-2009, 12:02
  5. My new G506?
    By DMgunn in forum CCKW
    Replies: 21
    Last Post: 07-21-2009, 23:54

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •