• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

What have you done to your HMMWV today/lately

TOBASH

Father, Surgeon, Cantankerous Grouch
Steel Soldiers Supporter
3,172
2,799
113
Location
Brooklyn, NY
Next it will be LED flashers BUT first want to get 24 Volt signal light for dashboard flasher control.
 

RichDane

Member
51
8
8
Location
Hatteras, North Carolina
I have replaced all the injectors and the return lines with the braided hose...LOVE THEM.......Haven't experienced and issues so far and they sure were easier than putting those little clamps in place with my ham-hock mitts...
 

Milcommoguy

Well-known member
Supporting Vendor
1,649
2,084
113
Location
Rosamond, CA
Picture show...

Upgrading some of the steering components. NOS steering box, A2 column, turn signal control, etc.

59019972870__EFF32CAE-54A8-4A6D-A5E5-EECD5A223852.jpgIMG_7348.jpgIMG_7355.jpgIMG_7379.jpg

Built steering wheel puller tool.

IMG_7371.jpgIMG_7372.jpg59045256680__8A6402F4-32C9-4104-AD05-8AF92256FE63.jpg59045268859__A3E28E90-BA1B-44FB-9F97-68E621B848F4.jpg

59044006885__FC706FE0-E522-4092-9F60-D592EC918DC7.jpg59044094477__804B5208-724D-4414-BD6F-56FF4BAAD530.jpg Fab new steering shaft / firewall seal.

Another day at the Hillbilly HumV Headquarters with the green gloves of grease, CAMO
 

Milcommoguy

Well-known member
Supporting Vendor
1,649
2,084
113
Location
Rosamond, CA
Alien stopped by to give me a hand with the front brakes.

IMG_7402.jpg

And you thought they're only at area 51. Got gremlins too, CAMO
 
Last edited:

TOBASH

Father, Surgeon, Cantankerous Grouch
Steel Soldiers Supporter
3,172
2,799
113
Location
Brooklyn, NY
Unsuccessful getting gauges to work so built a quick blinker defeat.

My vehicle is A1 so steering wheel won’t accept proper defeat ring.

Used chop stix from a prior meal.

Guess my vehicle is now multinational.
 

Attachments

Last edited:

Milcommoguy

Well-known member
Supporting Vendor
1,649
2,084
113
Location
Rosamond, CA
Another day playing HUMMWV.

IMG_7436.jpg Just another rusted up bolt the sawzall took care of and I have a BAD ASS impact gun.

IMG_7438.jpg So much for a stuck drain plug.

59089888838__A41D8236-EC09-45B4-9FF5-E20A27F334F6.jpg59089776338__A1657317-BB2B-478E-ADEA-9CCA15E52617.jpg Front left brake line. More BS and rust issues.
New to you. OLD truck to them. Rubbing a hole in line up against rotor. $15 part.

Note to newbies. Check and double check ALL SYSTEMS and know your truck, CAMO
 
Last edited:

Wire Fox

Well-known member
1,254
158
63
Location
Indianapolis, Indiana
Was this truly done my HMMWV? Not exactly, but close enough. I've had an MSA Millennium gas mask for a while, which is extremely similar to an MCU-2/P, which in turn has a lot of accessories cross-compatible with an M40 mask. After I setup the intercom, I realized how much of a non-event it would be add a microphone element to my mask and hook it into my intercom...so I dropped $12 on eBay and popped it in as soon as it arrived. The audio is pretty clear, with a very strong dynamic microphone sound. It definitely comes in way louder than the stock boom mic even without wearing a mask. I now have a very oddball capability that sits in the "why the **** not?" category.

And yes, I know I need a haircut! I'd be in a lot of trouble if I actually needed to use this mask for some reason and my hair was breaking the seal like it is.

IMG_20190924_215239.jpg

Sent from my Nokia 6.1 using Tapatalk
 
Last edited:

USAFSS-ColdWarrior

Chaplain
Super Moderator
Steel Soldiers Supporter
18,469
5,476
113
Location
San Angelo, Tom Green County, Texas USA
Was this truly done my HMMWV? Not exactly, but close enough. I've had an MSA Millennium gas mask for a while, which is extremely similar to an MCU-2/P, which in turn has a lot of accessories cross-compatible with an M40 mask. After I setup the intercom, I realized how much of a non-event it would be add a microphone element to my mask and hook it into my intercom...so I dropped $12 on eBay and popped it in as soon as it arrived. The audio is pretty clear, with a very strong dynamic microphone sound. It definitely comes in way louder than the stock boom mic even without wearing a mask. I now have a very oddball capability that sits in the "why the **** not?" category.

And yes, I know I need a haircut! I'd be in a lot of trouble if I actually needed to use this mask for some reason and my hair was breaking the seal like it is.

View attachment 777525

Sent from my Nokia 6.1 using Tapatalk
Gotta wonder if driving with the mask on might grab the attention of the fearful who might readily dial 9-1-1 !!!

Jus' thinkin'.

Carry on.
 

87m998

Member
70
10
8
Location
Idaho
The shifter is for a stock 4 speed tranny which I just have about 100 miles on so far the 700r4 swap is working out. Thanks
 

TOBASH

Father, Surgeon, Cantankerous Grouch
Steel Soldiers Supporter
3,172
2,799
113
Location
Brooklyn, NY
The shifter is for a stock 4 speed tranny which I just have about 100 miles on so far the 700r4 swap is working out. Thanks
I await my 700R4, and I'm happy to hear you're satisfied with yours.

What is your top end speed?
 

Daves86

Active member
139
80
28
Location
Manassas/VA
Nice looking Rig!
Second the what is your top speed question.
which spare tire carrier is that? I like the look of that bumper set up!
 

therooster2001

Active member
824
43
28
Location
Colorado
I did curbside pickup at Carrabba’s. They don’t have “3 color camo” as a car color when you order online. I asked about changing the website to accommodate the HMMWV color scheme, they didn’t get it.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks