Results 1 to 6 of 6

Thread: Need Documentation On MRAP LED Interior Lighting Kit

  1. #1
    General ryanruck's Avatar
    Join Date
    Jun 2014
    Location
    Cincinnati, OH
    Posts
    424
    Thanks
    362
    Thanked 369 Times in 202 Posts

    Default Need Documentation On MRAP LED Interior Lighting Kit

    Been a lurker for a while reading but now I need some information so, I hope I'm posting this in the correct location.

    I recently picked up what was described as an MRAP interior LED lighting kit, listed as:

    P/N MRP22360
    LRIP 9 Interior LED Lighting
    System Retrofit Kit

    NSN 2590-01-579-4922
    Modification Kit, Vehicular Equip

    I believe it's BAE manufacture, from what I've found, and has 6 Grote White/Blue dome lights similar to the 82400 (mine has 4 white, 4 blue) with associated harnesses and hardware.

    My problem is that it only came with a packing list, no installation instructions like every other military parts kit/upgrade kit I've bought. Each of the parts are labeled consistent with an instruction sheet that isn't there.

    Seller says he doesn't think the kits came with any instructions.

    I've been working on toning out the leads on the harnesses trying to match everything up but it's getting tedious so I figured I'd check here to try and save some time and sanity.

    Anyone have any installation instructions associated with this kit?

    I suppose I could run power straight to each of the lights but I'd really prefer to use the existing harness since it would make for a cleaner install and that was a big reason for buying it.

    Thanks!

  2. #2
    Private
    Join Date
    Jul 2017
    Location
    Mustang,Oklahoma
    Posts
    25
    Thanks
    1
    Thanked 23 Times in 12 Posts

    Default

    If you can post pictures I might be able to help

  3. #3
    General ryanruck's Avatar
    Join Date
    Jun 2014
    Location
    Cincinnati, OH
    Posts
    424
    Thanks
    362
    Thanked 369 Times in 202 Posts

    Default

    Quote Originally Posted by Oklahomadeputy View Post
    If you can post pictures I might be able to help
    Wow! Forgot all about this thread.

    Here's a picture of it from the original sale listing:

    20170705235624-4c56c777-me.jpg

    I can get some more detailed ones if you need them.

    I haven't installed it since I've been working on a ton of other stuff with my HMMWV this is going in.

    I did get in touch with BAE in June of last year and one of their project managers was nice enough to provide the following in regards to the harness:

    J1090 is a rear door open switch connector
    PX51 is a front dome light switch connector
    PX52 is the rear dome light switch
    J1092 looks as if it ties into the main harness on the Caiman or the dimmer module
    P278 was the blackout signal for the system

    He also said it's a 12v lighting system.

    Beyond that I haven't really dug into the kit to see if any of that actually helps and, it's been sitting in a box until I build out more of my interior. If you've got any other info, however, that would be great!
    1994 M998A1 with 6.5TD and 4L80E

  4. #4
    Private
    Join Date
    Jul 2017
    Location
    Mustang,Oklahoma
    Posts
    25
    Thanks
    1
    Thanked 23 Times in 12 Posts

    Default

    I will look in all my documents, ours has led lights( white and red) controlled from front just above AC controls and switch next to rear passenger on pass side

  5. #5
    General ryanruck's Avatar
    Join Date
    Jun 2014
    Location
    Cincinnati, OH
    Posts
    424
    Thanks
    362
    Thanked 369 Times in 202 Posts

    Default

    I just realized I forgot to mention he also specified it's for the Caiman MRAP.

    Thanks!
    1994 M998A1 with 6.5TD and 4L80E

  6. #6
    Private
    Join Date
    May 2018
    Location
    Eastsound, wa
    Posts
    23
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    I got a KIT too, but I think I might be able to re-use the "siren" hookup up for electircal partially on my LMTV.

    The part I do not understad is the mechanical one.., how to attach the LED lights. I have openings about the size of the light, but there is no backing to drive the screws into..

    I think I need something like self tightening clips , which would attach to the sheet metal.... Any ideas?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •