• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Armstrong Begone.....

Bdaman

New member
20
0
0
Location
Illinois
The guy at my local Napa thinks if I bring in original draglink we can maybe find a threaded draglink that will fit. So I can adjust length.

Sent from my ONEPLUS A3000 using Tapatalk
 

Bdaman

New member
20
0
0
Location
Illinois
Our truck was retrofitted with later model steering not unlike Rich and Bdamans trucks. I refer to it as "'80s steering". Not too long after we got it on the road, the input shaft seal began leaking like a sieve. Since I had no idea what it originally came from I ordered a replacement steering box for an '85 W250. Bolted in perfectly! It was also on less turn lock to lock than the one that came off, so it handles a little better now.
The '85 gearbox you speak of. Is it power or manual?
Sorry, got you confused with Bdaman.

In his case, I would recommend what I posted above. :)

Sent from my ONEPLUS A3000 using Tapatalk
 

michigandon

Well-known member
1,442
82
63
Location
Wake Forest, NC
It is a power gearbox, identical in appearance and fitment to the one that was already there.

I would also make sure that everything was installed properly. In our case, the POs put the draglink on backwards, which resulted in a VERY wide right turn!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks