Another newbie chiming in

All,
I acquired a 45 US6 and hope this is the proper forum to post in.

She's been used and left out in the elements, but has potential.
It is my intent to tear the Hercules JXD run in the spring. I'd like to locate some eng parts and could benefit from some pics, and very much look forward to bs'n with you all.

Thanks!
dan

Welcome to the site and a picture says a bunch if not a thousand words.

Welcome from Arizona and... have fun with your project!

I dont know what a 45us6 is, so some pics are needed. And welcome aboard, this place is a goldmine of info.

Welcome and good luck with your Stude. Post up what Herc parts you need and the hive here will try to point the way.

Guys,
You'll have to direct me where I can post a pic or two.
A 45 US6 is a 1945 Studebaker 2-1/2T truck in 6X6. Hercules engine- old large flathead 6.
Pretty cool piece of American History! I hope I can pose this info: https://en.wikipedia.org/wiki/Studebaker_US6.

dan

That is an awesome truck to restore. Welcome to the site and hobby from PA.

Nice truck you have seemingly..spend a little time going through how to post a picture and let's have a view of it.
reply "ok" then, go advanced, then, manage attachments then upload, browse then add files. you will see it appear,
another one? upload, browse, add files,
another?
upload, browse, . then, add files.
Go for it;

DanO,
Here are a couple of links that you may find of interest.

http://g503.com/forums/viewtopic.php?f=26&t=160842

http://g503.com/forums/viewtopic.php?f=26&t=265836