MEP-802A MEP-803A battery hold downs

Howdy,



MEP-802A Battery information

uses a group 51R battery
6160-01-431-4547 88-20056 battery tray
OVERALL LENGTH 11.000 INCHES NOMINAL
OVERALL HEIGHT 1.500 INCHES MINIMUM AND 4.390 INCHES MAXIMUM
OVERALL WIDTH 5.750 INCHES NOMINAL
MATERIAL PLASTIC, POLYETHYLENE




MEP-803A Battery information

uses a group 34 or 34/78 battery
6160-01-431-4546 88-20516 battery tray
OVERALL LENGTH 10.370 INCHES NOMINAL
OVERALL HEIGHT 1.500 INCHES MINIMUM AND 4.390 INCHES MAXIMUM
OVERALL WIDTH 6.880 INCHES NOMINAL
MATERIAL PLASTIC, POLYETHYLENE

It looks similar to the MEP-802 tray ,but slightly larger

Both MEP-802/803 use the same bolts, and hold down bracket

5306-01-367-7777 88-20060 bolt, hook


6160-01-476-4365 88-20055 bracket


MEP-802A battery


MEP-803A battery

Howdy,

The trays look similar, but they are different sizes. The parts manuals also do not jive with the proper fitment on later TM's

MEP-802A 88-20056 battery tray
MEP-803A 88-20516 battery tray

Thanks for the info!!

Where are the simple rubber flap type terminal protectors available from?

Doing a bing search, every possible type comes up in images other than the type pictured above, and the same type I've seen used on many trucks.

Asking in anticipation of putting new batteries in my soon to be delivered generator.

Thanks

NSN: 5940-00-738-6272, part number: 10942521 gets you the black cover, package of ten. Look in febay. There is also a red cover, but I never used them.

I never use these covers... they are frankly nothing but a PITA. I take them off of every machine I go through.

Light in the Dark said:

I never use these covers... they are frankly nothing but a PITA. I take them off of every machine I go through.

Click to expand...

I agree. The only reason I used them is that it's REQUIRED in the Army. Or at least was when I was in, and the 8 years I worked as a contractor.

Me Too. Mine are in the parts box.

Light in the Dark said:

I never use these covers... they are frankly nothing but a PITA. I take them off of every machine I go through.

Click to expand...

late support, but i so agree ..royal PITA and like urself, i have a tray full of emm.. best: mac/mc

I just use the individual flap style terminal covers.

If anyone is looking for the battery hold down sets, some just appeared in the classified section of SS