• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Generator Accessories

Daybreak

2 Star Admiral
Steel Soldiers Supporter
1,521
740
113
Location
Va
Howdy,

Generator Accessories
Genset accessories.jpggenerator accessories.jpg


slide hammer
slide rod driver/puller rod
5120-01-013-1676 SLIDE HAMMER, GROUND 13226E7741
slide hammer.jpg


ground rod, knuckles, ground strap, drive head bolt
5975-00-878-3791 RODS, GROUND SECTIONAL 9FT AA-55804-III-B
5975-00-794-2523 COUPLINGS, (THREE IN SET)
5975-00-924-9927 DRIVE/HEAD STUD
ground ros and knuckles.jpg


remote 55gal/5gal fuel pickup adapter
2910-00-066-1235 ADAPTER ASSY, FUEL DRUM 13211E7541
7240-01-337-5269 FUEL CAN, OLIVE DRAB
7240-00-177-6154 FLEXIBLE SPOUT
fuel can adapter.jpg adapter in MFC.jpg


aux fuel supply line
4720-00-021-3320 or 4720-01-469-7057 HOSE ASSEMBLY, NONMETALLIC
aux fuel line.jpg


Oil drain elbow
4730-00-809-9703 ELBOW, PIPE TO HOSE MS24519-9
oil drain pipe to hose for trailer 1.jpg


trailer grounding stud
5940-00-021-3321 GROUND TERMINAL STUD MS39347-2
Trailer grounding stud 1.jpg


6awg braided copper ground
ground wire.jpg


carbon dioxide fire extinguisher
4210-01-361-6921 Fire Extinguisher, CO2
Amerex 322.jpg

Hammer
5120-00-251-4489 Sledge Hammer, 8lbs.
8lb engineers hammer.jpg

Trailer Mounted Accessories Box
Generator Accessories Box.jpg
 
Last edited:

Zed254

Well-known member
866
464
63
Location
S. Hampton Roads, VA
I bought one of the generator trailers out of Letterkenny recently and was surprised to discover a box of tools was included. This worked well for me because I haven't received anything except 1 aux. fuel line with the 2 generators I've purchased. The tool box had just about everything except an auxiliary fuel line. There was a bag of fittings that included bolts for bolting generator to trailer, tool box to trailer, the ground stud, and 2 oil drains - 1/2" and 3/4" pipe - with hose and clamps. Also had an 8 lb sledge hammer and ground rod kit (rods, slide hammer, bolts/nuts) in it. A VERY nice surprise!!!
 

Attachments

Last edited:
37
0
6
Location
Sussex County, NJ
I bought one of the generator trailers out of Letterkenny recently and was surprised to discover a box of tools was included. This worked well for me because I haven't received anything except 1 aux. fuel line with the 2 generators I've purchased. The tool box had just about everything except an auxiliary fuel line. There was a bag of fittings that included bolts for bolting generator to trailer, tool box to trailer, the ground stud, and 2 oil drains - 1/2" and 3/4" pipe - with hose and clamps. Also had an 8 lb sledge hammer and ground rod kit (rods, slide hammer, bolts/nuts) in it. A VERY nice surprise!!!
I have to ask... What kind of covers did you make for the air intake grates. I'm currently wrapping mine up in a tarp, not sure if it keep moisture out or in. So far I removed one mouse nest and afraid there are more coming.

Thanks,
Erik

Sent from my XT1254 using Tapatalk
 

Daybreak

2 Star Admiral
Steel Soldiers Supporter
1,521
740
113
Location
Va

Chainbreaker

Well-known member
1,740
1,810
113
Location
Oregon
Got any part #'s for the plastic Box Wrenches used on load terminals and which model genset load terminals they can be used on? I have looked in TM's but can't seem to put my finger on Box Wrench p/n for MEP-002a/-003a.
 

Chainbreaker

Well-known member
1,740
1,810
113
Location
Oregon
Chainbreaker,

There never was any box wrench made for any MEP-002A to 007A.
Hmmm, I see box wrenches advertised from time to time on eBay that "allegedly" are supposed to fit -002A/-003A load terminals. I once bought one of those that seller advertised to fit -002a; unfortunately it was a big honker that did not fit (P/N: CTM-282 / 5120-00-138-3790). Well...I guess if they never made a box wrench to fit the -002a/-003a load terminals I should just stop looking and use a metal one.
 

Zed254

Well-known member
866
464
63
Location
S. Hampton Roads, VA
An image of the wrench from my MEP-803A is attached for part numbers. A 1-3/8 combination wrench fits the lugs. No idea if it will fit an 002a/003a. Part number is 30554 88-21146.
 

Attachments

Last edited:

Guyfang

Moderator
Staff member
Moderator
15,686
21,619
113
Location
Burgkunstadt, Germany
I didn't say that some of the wrenches won't fit. I said the milatary didn't make one especially for the 002 & 003. Now if I wanted to really know, I would look at the NSN of the load terminal, in several different parts manuals, and compare that to the various TQG parts manuals. I might just do that when I am using my computer, and not this silly tablet.
 

Light in the Dark

Well-known member
Steel Soldiers Supporter
3,522
4,964
113
Location
MA
I think the wrench for the 802/803 works just fine on the 002/003 (I think I have used this many times on the 002 I just sold).
 

reset2

Active member
166
60
28
Location
Myersville MD
I just won an 803 at Letterkenny but it only came with a terminal wrench trailer jack crank and 3 ground rod sections.

Sent from my SM-G935V using Tapatalk
 

DOGWOODRIDGE

Member
30
3
8
Location
jackson, la
I just won an 803 at Letterkenny but it only came with a terminal wrench trailer jack crank and 3 ground rod sections.

Sent from my SM-G935V using Tapatalk
I’m looking for the housing cover that goes over the cylinders on my MEP-002 generator. It came without one. Anyone know where I might find one?


Sent from my iPhone using Tapatalk
 

Guyfang

Moderator
Staff member
Moderator
15,686
21,619
113
Location
Burgkunstadt, Germany
Send a PM to Ray 70, and start a Want Add in the Parts wanted forum. When you post something to an old thread, often you do not get the visibility you need.
 

glcaines

Well-known member
Steel Soldiers Supporter
3,834
2,393
113
Location
Hiawassee, Georgia
I’m looking for the housing cover that goes over the cylinders on my MEP-002 generator. It came without one. Anyone know where I might find one?
Sent from my iPhone using Tapatalk
I don't know if they have them now or not, but I got a different replacement part of the enclosure for my MEP003A from Delks several years ago. The price was very good at the time.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks