• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Blow by tube

beastm35

Member
79
1
8
Location
plainfield ct
From the top of motor down the slobber tube there is two threaded holes one with a copper line hooked to it and the other the one above that is open and blow by is running down the tube. Should this hole by capped?This is on a muiltfuel motor non turbo.. thank's
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,247
1,166
113
Location
NY
No, but you can if you want too.

Do you have a rubber extension hose below the slobber tube(steel)?

You should have one that goes to the bottom of the axle(length).

Again, no big deal if you do not, but you can add one.
 
Last edited:

FloridaAKM

Well-known member
2,699
391
83
Location
Gainesville, Florida
Both of my trucks didn't come with the slobber tubes for some reason. McMaster-Carr has blue silicon 1 1/4" tube that was added to both trucks to route the blowby to in front of the battery box & out of the way. It may not be original, but it suits me & works well.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks