2018 Georgia Military Vehicle Rally buy-sell-trade

SCM35A2 · Sep 17, 2018

Hey guys, I have these parts that came with truck when I bought it. Not sure at all what they fit or what they are worth, if anything at all. If anyone knows what they are or wants them then make me an offer & I'll have them with me at the event.

One of the racks has wooden slats & the other has fiberglass, as for the panels one is metal & the other is plastic.

juanprado · Sep 18, 2018

SCM35A2 said:
Hey guys, I have these parts that came with truck when I bought it. Not sure at all what they fit or what they are worth, if anything at all. If anyone knows what they are or wants them then make me an offer & I'll have them with me at the event. View attachment 741815 View attachment 741816 View attachment 741817 View attachment 741818 View attachment 741819

One of the racks has wooden slats & the other has fiberglass, as for the panels one is metal & the other is plastic.

Pm sent.

SCM35A2 · Sep 18, 2018

juanprado said:
Pm sent.

Replied back, consider them yours sir!

Streamline · Sep 18, 2018

Just for a reminder,
I'm still looking for these items to buy:
Pup Tent Shelter Haves,
Aluminum Camo Netting Poles,
WW2 Early Vietnam Canvas Duffel Bags, and Mail Bags....etc

all the items i'm looking for are also mentioned on page 2 of this thread or follow link below. Thanks
https://www.steelsoldiers.com/showt...a-Military-Vehicle-Rally-buy-sell-trade/page2

Dock Rocker · Sep 18, 2018

Streamline said:
Just for a reminder,
I'm still looking for these items to buy:
Pup Tent Shelter Haves,
Aluminum Camo Netting Poles,
WW2 Early Vietnam Canvas Duffel Bags, and Mail Bags....etc

all the items i'm looking for are also mentioned on page 2 of this thread or follow link below. Thanks
https://www.steelsoldiers.com/showt...a-Military-Vehicle-Rally-buy-sell-trade/page2

Message sent

Sent from my iPhone using Tapatalk

Streamline · Sep 18, 2018

11x11 Command Post Tent Frame Replacement Pin's Billet Aluminum

I now have available a Replacement Billet Aluminum Pin for the 11x11 Command Post Tent.
I have been selling these for around $80 for a pack of 6 on many of my sites.
If anyone's needing some of these pins let me know. I will have a few with me at the Rally as well.
Im selling the for $65.00 for a pack of 6 Billet Aluminum pin's for the Rally.
Military Command Post Tent Replacement Part
6 ( SIX ) Custom Built Billet Aluminum Tips
This kit will replace 1 complete tent frame, with 6 pins.

PLEASE READ NOTE:
NOTE:: I found out that the Key Way hole can be off or in different locations from frame to frame
to secure your pin to the frame, due to different Government Contractors.
Your custom Aluminum Pin is sent to you with NO predrilled hole for key way or roll pin to hold insert in.
Just place my custom made replacement pin into your frame after removing original pin,
then mark hole location on new pin, then drill out the whole on your new pin.
Now you can place the pin back in your tent frame and reinsert the locking roll pin.

You will need 6 Tips to replace 1 complete Tent Frame!
Military Tent NSN# 8340-01-323-2454, NSN# 8340-01-459-8167

Thanks

Microjeep 2 Sets

glcaines · Sep 18, 2018

I have the following for sale that I can bring to the Georgia Rally

For Sale
NOS M35A2/A3 passenger door-complete, Camo $175.00 Sold
NOS Snatch block , 10 Ton, For 5/8” wire rope $200.00
Turret Armor with mount (mount needs to be re-welded on) $250.00
Medium tow bar with ¾ and 1” feet and axle clamps $600.00
Wheel, M35A3 (No tire, no valve stem) $150.00
Beadlock, M35A3 $25.00
NOS M35A2/A3/5 Ton cab reinforcement plate $150.00
MOLLE Assault Rifle Scabbard, New $30.00

Need
NOS M35A2/A3 fender, drivers side
M35A3 CTIS wheel valve stem

gimpyrobb · Sep 18, 2018

I've got a set of the billet pins and they rock!

SCM35A2 · Sep 18, 2018

To date I've found everything that I've been looking for/wanted from you guys & I wanted to thank you all. The only part I haven't found is a hard top for my M35A2 truck. Does anyone have one or know of one that is in good to great shape, no rusted inside lip or beat to ****. Post here or send me a private message, the one on my truck is solid, but the inside lip on the lower half is rusted completely out & barley stays on the truck. Thanks guys.

Streamline · Sep 20, 2018

Older Type Stretchers Canvas

I have a lot of these Canvas wooden Stretchers.
Pretty decent condition, specially for age.
These would make great Props for vehicles.

The one in the pictures is torn, but there are a few that's not torn.
Asking $15.00 each. Not Torn
$10.00 each for torn.
If there is any interest I will pick them up and bring to rally.

73m819 · Sep 20, 2018

Looking for a working metal temp gauge/sender, looks do not matter as long as it works and the lens is clear. NO PLASTIC CRAP

Also looking for a 809 series front winch drive shaft, NOT a wench drive shaft (already have one) a front WINCH driveshaft.

Looking for a 939 steering wheel, does not have to be new, just no cracks.

Anybody going to singles want to trade a set (20l,20r) of single rear lug nuts for a set of thimbles and thimble nuts (20l,20r of each)

Looking for TWO inner wheel seals for a old 105

Have for sale TWO 939a2 wheels with good tires $100 each.

Have for sale FIVE 939a2 wheels with BAD tires, some can not be used, others may be fixable, $50 each

Streamline · Sep 20, 2018

Scout Tent

I have one of these Scout Tents available.
I had mine setup last year at the Rally.
These have a sealed floor in them.
Very roomy, and nice! Sleeps two easily, probably would be considered a 4 man tent possible 5.
If there is any interest I will get it out and packed up for the rally.
Asking $150

Sold***Sold***To Queto

Recovry4x4 · Sep 20, 2018

Hey Derek,. I'd like to get one of those $60 tanks too.

Floridianson · Sep 21, 2018

Can anyone use the Air Techniques oil less compressor-dehydrator. My plan was to have it in the trailer for the plasma cutter so I would not have to run the truck. Nice unit and good shape. I can dig it out if you want to see the real unit. Only goes to 80 psi but its dry air. $400.00.

Streamline · Sep 21, 2018

I have a Flatbed M762 Jeep Trailer for Sale.
This is a Rare Bird! Will need Restoration, but hay its a small trailer, throw a quart of CRC on it and your good.
Only real issue is someone welded on a regular trailer hitch!
Im sure we can get Ron to fix that!
This will be taken into considered during price negotiations!

If any interest, I will work on getting it to the Rally!
Asking $500 OBO

papabear · Sep 22, 2018

TaylorTradingCo said:
I found a source for these new take off 45 gallon diesel fuel tanks. This company mods brand new trucks for a special purpose and the factory tanks are in their way, so they pull them off immediately. They measure 28"wide x 22" deep x 18" tall. $60 each. I can get lots of them.

I would like a tank as well Sir. I THINK....MAYBE....I can make it work on my K18-C.

Floridianson · Sep 22, 2018

Anyone need 6 hp Teledyne 4A03 NOS still on crate. I have the hard copy complete TM with it. $500.00 obo. Tanks

Streamline · Sep 23, 2018

Laser Engraved items

I will have some laser engraved ammo cans and mag's at the rally. I'm also working on having some laser engraved OD Green tumblers available, trying to get started on them this week.

Custom Laser work is now available, by me!
I have many different types of items you can have personalized. If anyone is interested in having something made for me to bring it to the rally get ahold of me and we'll work it out.

Asking $12 and up for Ammo cans.
Asking $15 on mags
Tumbler pricing not sure yet still waiting for them to come in so I can start working on them.

Thanks

sandcobra164 · Sep 23, 2018

I would have thought that flat 4 would make more than 6 horsepower. We had one on an air compressor in the National Guard, it would make a neat go-kart engine.

simp5782 · Sep 23, 2018

Few parts to clean out. Mostly for the big trucks -

NIB - Transfer Case Input yoke for HET - Oshkosh 55000 Case - # 6.5-4.2561-1x - $180 shipped
used - Transfer Case input yoke for HEMTT - Oshkosh 55000 Case - #6-4-6761x - $100 shipped
NOS - main shaft slip yoke for M915A2 - M916A1/2 - #18NLS48-21C - $140
NOS - 1810 series U joints - 2-281x - $30 each shipped - 2avail.

M939 series truck radio brackets - $120 shipped.
Used/Good - NHC250 Fan Clutch - Low Hours - $220 shipped
Used/Good - NTC400 Fan Clutch - $160 shipped
Used/Good - 4LHR Schwitzer Turbo off NTC400 - $250 shipped
Used/Good - Radiator - M915 series trucks with BC Cummins - $350 - Can help arrange shipping
Used - Engine/Radiator mount - M915A0/1 only - Will work for a M939 engine swap to BC - $200

NOS - Condenser/Fan Assembly - Fans work - Surplus unit - $120 - Can help arrange shipping
NOS - Interior AC unit for HMMWV - Will fit others - Powers up $160 shipped.
M916A2 Side large toolbox $150

Two of the large Air Beam Tents I have in the classifieds - $2100 for both.
Good running NTC365 Big Cam Cummins - Complete with AC - $3500

2018 Georgia Military Vehicle Rally buy-sell-trade

Well-known member

Well-known member

Well-known member

Active member

Active member

Active member

Attachments

Well-known member

dumpsterlandingfromorbit!

Well-known member

Active member

Attachments

Rock = older than dirt , GA. MAFIA , Dirty

Active member

Attachments

LLM/Member 785

Well-known member

Attachments

Active member

Attachments

GA Mafia Imperial 1SG

Well-known member

Attachments

Active member

Attachments

Well-known member

Feo, Fuerte y Formal