• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

I need help reattaching speaker wire connector

US6x4

Well-known member
Steel Soldiers Supporter
1,165
2,028
113
Location
Wenatchee, WA
I need to reattach the wire connector inside my H-161 headset. The wire pulled out and I'm not sure how they reattach. It seems that they don't twist on and I don't see evidence of a crimp. Are they supposed to be soldered on?
Any ideas?

20181104_081822.jpg
 

US6x4

Well-known member
Steel Soldiers Supporter
1,165
2,028
113
Location
Wenatchee, WA
I spied a dabble of solder on connection of the other speaker in the headset so I'm thinking of starting with a soldering attempt.
 

ke6rwj

creating havoc one broken bolt at a time...
Steel Soldiers Supporter
267
130
43
Location
Alabama
Flux is your friend here, these wires don't like to be soldered without it
 

papakb

Well-known member
2,288
1,185
113
Location
San Jose, Ca
See if you can't locate some low temperature solder too. Some of the older audio electronics had tinfoil wrapped string rather than real stranded copper wire to keep them flexible.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks