Page 2 of 2 FirstFirst 1 2
Results 11 to 17 of 17

Thread: M929A1 bed hoist hydraulic rams and crosshead bent

  1. #11
    Colonel Ajax MD's Avatar
    Join Date
    Nov 2018
    Location
    Mayo, MD
    Posts
    331
    Thanks
    84
    Thanked 233 Times in 133 Posts

    Default

    Quote Originally Posted by porkysplace View Post
    By the time you get enough heat on that to bend it back it's going to damage the rams .
    Could he disconnect the rams and shore up the bed with pilings in the raised position?
    Motorpool:

    (Isn't owning one of this insanity enough??)
    1971 M813 "Ox" (named for Dewey Oxburger)

  2. #12
    4 Star General porkysplace's Avatar
    Join Date
    Apr 2009
    Location
    mid- michigan
    Posts
    8,915
    Thanks
    6,031
    Thanked 4,609 Times in 2,673 Posts

    Default

    Quote Originally Posted by Ajax MD View Post
    Could he disconnect the rams and shore up the bed with pilings in the raised position?
    After re-reading post #1 it looks like rams are bowed as well. To fix it right and make it dependable he needs to find some replacement parts .
    Unless it's just a weekend toy , but if he counting using it on any site work you want reliable fixes .

  3. #13
    4 Star General tobyS's Avatar
    Join Date
    May 2013
    Location
    Rochester, Indiana
    Posts
    3,921
    Thanks
    2,322
    Thanked 1,681 Times in 1,042 Posts

    Default

    Quote Originally Posted by porkysplace View Post
    By the time you get enough heat on that to bend it back it's going to damage the rams .
    No it won't. That mechanical joint won't put enough heat into the end of the rod shaft to matter. If the cylinder rods are bent, that is another story.

  4. #14
    4 Star General Jbulach's Avatar
    Join Date
    Nov 2013
    Location
    Sunman Indiana
    Posts
    1,609
    Thanks
    2,306
    Thanked 997 Times in 592 Posts

    Default

    I would guess the M817 parts are interchangeable. Another option if the crosshead is symmetrical, flip it over, maybe spin the cylinder rods 180 as well. See if the bed will go all the way down and just run it...
    M925A2

  5. #15
    Private Buckwild's Avatar
    Join Date
    Feb 2019
    Location
    Readyville, Tennessee
    Posts
    6
    Thanks
    10
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by Jbulach View Post
    I would guess the M817 parts are interchangeable. Another option if the crosshead is symmetrical, flip it over, maybe spin the cylinder rods 180 as well. See if the bed will go all the way down and just run it...
    I kinda been chewin on this idea. Its already ruined, so its not like I can make it any worse I dont think. The crosshead does look like I can flip it, and who knows,..if i dont ever overload it it may work forever that way. I'm not gonna lie though,...having an excuse to buy that other M817 for parts is making my wallet burn
    Man, despite his artistic pretensions, his sophistication and many accomplishments, owes the fact of his existence to a six-inch layer of topsoil and the fact that it rains.

    - 1985 Chevy 3/4 ton truck CUCV, 6.2 diesel, 6" lift, 35"tires, service/utility bed, painted white
    - 1988 M929A1, 14R20 singles

  6. #16
    4 Star General M35A2-AZ's Avatar
    Join Date
    Nov 2010
    Location
    Tonopah, AZ
    MVPA
    34235
    Posts
    2,926
    Thanks
    804
    Thanked 1,031 Times in 554 Posts

    Default

    I would take it off and find a shop with a BIG press and have them try to bend it back, then reinforce it. Safety note, be sure to hold the bed up with something.
    On my M929 the bed will go almost 90 degrees up.
    Trucks: 43 Willy's MB, 52 M37, 71 M35A2 w/w, 84 m936, 85 M923A1, 85 M929, 84 M925
    Trailers: 66 M332, 92 M105A2, 08 M200A1
    Gen: 03 MEP-803A, 01 MEP-805B
    S-280 Shelter

  7. #17
    4 Star General tobyS's Avatar
    Join Date
    May 2013
    Location
    Rochester, Indiana
    Posts
    3,921
    Thanks
    2,322
    Thanked 1,681 Times in 1,042 Posts

    Default

    The 817 and 929 I have both have fold up bed supports that hold at about 45 degree, just for this purpose.

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •