• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Fuel tank full of growth

fpchief

Well-known member
1,041
218
63
Location
South Alabama
I just pulled the tank off my "parts" deuce. Full of growth. I have removed pump, etc and now need to get all of that growth out. What is the best course of action? Is there anything I can put in there and let soak that will dissolve it? It is pretty bad.

Sent from my SM-G955U using Tapatalk
 

fpchief

Well-known member
1,041
218
63
Location
South Alabama
Will be putting the additive in when I get it all back together to keep it from happening again

Sent from my SM-G955U using Tapatalk
 

frank8003

In Memorial
In Memorial
6,426
4,973
113
Location
Ft. Lauderdale, Florida
There is many posts within SS about fouled tanks.
They have even been cut apart and refurbished better than NEW

https://www.steelsoldiers.com/showthread.php?132914-Fuel-contaminated-odd

My suggestion is to get it clean then make a "one GTH" filter like I made.
One may permanently install it or mount it on a hand truck. You will never have foulde fuel again. It really screws stuff up.
One may choose to filter down to one micron if one wishes.

We are trying to protect the HH internals, that fine hand lapped surfaces.................
PM me and I show.
045.jpg
 

fpchief

Well-known member
1,041
218
63
Location
South Alabama
There is many posts within SS about fouled tanks.
They have even been cut apart and refurbished better than NEW

https://www.steelsoldiers.com/showthread.php?132914-Fuel-contaminated-odd

My suggestion is to get it clean then make a "one GTH" filter like I made.
One may permanently install it or mount it on a hand truck. You will never have foulde fuel again. It really screws stuff up.
One may choose to filter down to one micron if one wishes.

We are trying to protect the HH internals, that fine hand lapped surfaces.................
PM me and I show.
View attachment 766584
I like. Will Inquire once I get this tank halfway clean. Pure gasoline seems to be dissolving it.

Sent from my SM-G955U using Tapatalk
 

sue

Active member
384
285
43
Location
tulsa OK
Pressure wash, except in the hottest summer
weather add about 10% gas to the fuel. A little
gas holds microbe grow at bay real good.
 

Daybreak

2 Star Admiral
Steel Soldiers Supporter
1,521
740
113
Location
Va
Howdy,
It depends on how far you want to go with cleaning.
Drain completely
Wash it out and drain.
wash it out and drain.

pour in some Isopropyl Alcohol 91% and splash it around good, drain and let air dry. done, clean

The Isopropyl Alcohol is the final step for cleansing and being prepped for being put back into service. It will assist in displacing any water, and as you know, it will evaporate away.

Danger = "NO SMOKING" :burn:

 
Last edited:

Elijah95

Certified Rookie
1,239
1,183
113
Location
Georgia
Not sure if you’ve already remedied the tank, but I’d suggest removing the tank, pouring everything out and getting about $25 worth of e85 (85% ethanol 15% gas) and dumping in the tank, plug the holes and swish it around. It’ll eat almost anything nasty in that tank, flush it out and reinstall
 

TGP (IL)

Active member
511
33
28
Location
Metro East IL
You need to determine if it is algae or bio diesel separation from old fuel.
Of course if your not using bio blend or the fuel is relatively fresh, then it could be algae
From water intrusion.

I just went through the bio separation in old fuel.(six months)
The shelf life of biodiesel is pitiful.

Drain the tank and put gas in it and let it soak for a day or so.
Slush it around and rinse.
Also lacquer thinner or xylene also works well.

Best to remove and disassemble the tank, and soak pump, sending
Unit, and filler neck separately in a five gallon bucket.

Tom
 

rustystud

Well-known member
9,071
2,387
113
Location
Woodinville, Washington
Then after you get everything clean again. You need to start a regular regimen of adding something like "Bio-Bor" to your fuel. I add some to "every" tank refill. Plus a good injector and fuel injection pump lubricity agent. Every tank fill up !
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks