• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Eaton CTIS PCU rebuild

knelezen

Member
Steel Soldiers Supporter
31
2
8
Location
Wisconsin
I had the solenoid go out. I thought it was the valves so I cleaned them and replaced the o-rings. But the solenoid for the control vavle went out. I did an ohms test an it was open. I switched it with the deflate solenoid and I could inflate but not deflate. I purchased a solenoid pressure valve
From eBay and used just the solenoid. I wired it in and it's good as new now.
 

Tinstar

Super Moderator
Super Moderator
Steel Soldiers Supporter
4,254
1,687
113
Location
Edmond, Oklahoma
Yes post any pics and detailed information, part numbers, etc that you can.
Post pics direct to Steel Soldiers site as links go dead eventually.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks