• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

High-Low shifter boot

montaillou

Well-known member
Steel Soldiers Supporter
790
788
93
Location
W.WA
High-Low PTO shifter boot

Anyone got a good solution for a transfer case boot?

I'm afraid my ignorance is great in this area. I've found a number on the web but the ones I've looked at don't list dimensions. Is the size universal and does this apply to the deuce? Has anyone found one they feel fits the deuce well and blocks some of the sound & heat?

I have seen some articles on the web where people use the same shift boot as the gear shift and this doesn't appeal to me.
 
Last edited:

montaillou

Well-known member
Steel Soldiers Supporter
790
788
93
Location
W.WA
As a follow up, after scouring the web I found 3 good other options for the PTO boot (I just didn't care, aesthetically, for the stock boot).
https://www.strongholdshiftboots.com/product-page/jeep-cj-76-79-dana-20-trim-bezel

https://www.strongholdshiftboots.com/product-page/dodge-transfercase-trim-bezel

Now these two are just the bezel itself. And I probably would've bought from this company but they didn't get back to me as fast as another vendor whom I did buy from and was cheaper (came with the boot and bezel):

http://www.controlcables.com/emergency-brake-boot-ring-fits-b1000-b101/

bootANDring__28643.1392314419.jpg

 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks