• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

bendix plug on generator regulator

1951m37

New member
3
0
1
Location
Calico Rock Ar.
Good afternoon everyone. I hate to bother anyone, but I could use a little information if anyone could help me. I have a 1951 M37 that I need to replace the wires in the four pin male bendix plug that connects to the regulator. I have disconnected the plug, removed the screw on rear cap and moved the rubber insert back to expose the wire pins. Can anyone give me advice on how to remove the pins from the connector so I can r&r wires. I am trying to avoid damaging the connector. Many thanks.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks