• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

MEP-804A 24V Alternator no output and RPM Dropouts While Running

155mm

Chief and Indian
Steel Soldiers Supporter
1,168
375
83
Location
Guymon, OK

mrosalik

New member
15
0
0
Location
Oakland Michigan
Thanks again. I found it in the Technical Manual on a conversion update to circuit breaker. Now when I go back out I know where this is to look. I can also make sure the 60HZ is selected. I also see that the ammeter uses a real shunt. So I can double check the panel meter on the front for accuracy. It was in the green briefly one day last week and when I put voltmeter on cranking batteries I had 28.4V But in a few seconds the panel meter zeroed out again.

FU-1 to CB-2 Figure 5-44.jpg
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks