• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M809 Axle Shaft Repair

814
16
18
Location
Universal City, TX
Good afternoon SSers. I am in the process of replacing parts on the passenger side front axle on my M813A1. While removing the axle shaft I managed to turn it and the large bearings came out. I have looked in the -20 and -34 but did not see anything pertaining to putting it back together. anybody have any pointers or know where in the TM I should have looked?

Thanks, Mik
951-551-5521
 

NDT

Well-known member
Steel Soldiers Supporter
10,106
5,712
113
Location
Camp Wood/LC, TX
You just move to the same sharp angle you had when they popped out and then pop them in again, then straighten out the assy to keep them captured.
 

gringeltaube

Staff Member
Super Moderator
Moderator
Steel Soldiers Supporter
6,872
2,232
113
Location
Montevideo/Uruguay
:ditto:
I'm assuming you have the Bendix type CV-joint with the four large balls, which is the same as in the older M39 series trucks.
This is covered in the old TM-9-2320-211-35, on pages 283-285. (The images are extreme poor quality but the description is very detailed.)
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks