• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M151A1 steering column removal

Wheat1

New member
6
0
1
Location
Roll, OK
Anyone know how to remove steering column on M151a1? Working on restoration. Need to turn vehicle over. Dont want that much weight on steering column.
 

Flyingvan911

Well-known member
4,709
158
63
Location
Kansas City, MO
There are four bolts that hold the bracket to the dash. There are three that hold it where it goes through the floor and two that hold it to the rubber disk at the gearbox. You’ll also need to remove the fitting for the rubber steering disk before you can pull the steering column up through the floor. And you’ll need to disconnect the horn wire if it’s still there.
 

Wheat1

New member
6
0
1
Location
Roll, OK
Thanks Flyingvan, but I think you are describing a sterring column for an A2. Mine has 4 bollts at dash and a clamp above gearbox. I have that loose, but dont know how to disengage column from gearbox with total disassembly.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks