• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Hello from MS

Rat Patrol

New member
1
0
0
Location
Clinton, Mississippi
Hey folks, been lurking here for a bit and finally joined. I've had a few MV's and Jeeps. I've been reading quite a bit in the cucv section recently after buying an m1028 that had a 12v "conversion" and was looking to convert it back to 24v since everything seems to be there. I also installed a mechanical modulator on the TH400 because the vacuum pump and vacuum modulator were bad. Driving perfect now just need to get taller tires to lower the rpm some. Looking at getting hmmwv wheels and tires.

My most notable rides...

My first was a 42 Ford GPW #60603.

uj8LBE5l.jpg

Second was an M37 1954

hfXMgRTl.jpg

current- 85 M1028

8I7DA66l.jpg

46 CJ2A that had a repop M38 tub. My DD/off road toy for a year. L134, T90, D18, 5.38's, and 11x2 bendix drum brakes.

BFDLcNzl.jpg


And a little project I've been fooling with over the past year is a 55 3B with SOA YJ springs, F134, T98, D18 and currently D25/D44 5.38 with 16" Jackman's. Working on the cage and other things.

j2G9qibl.jpg
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks