Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Need MEP-002a Wiring Harness & Generator Stator or Complete 5 kW Generator Head

  1. #1
    3 Star General
    Join Date
    Mar 2013
    Location
    Oregon
    Posts
    969
    Thanks
    650
    Thanked 1,010 Times in 537 Posts

    Default Need MEP-002a/003a Wiring Harness & 002a Generator Stator or Complete Generator Head

    The MEP-002a I recently purchased was vandalized where vandals cut out sections of the wiring harness for its copper content I suppose. Unfortunately, in addition to cutting out the main wiring harness they also cut out the leads that come out of the generator head.

    Therefore, I am in need of the following items either NOS or in "good working condition":

    1. Complete wiring harness : MEP-002a Wiring Harness, Generator Set NSN 5935-01-0050-9812 (72-5156) (338-0575) Or...MEP-003a WIRING HARNESS,GENERATOR SET 6115-01-100-4996
    (72-5155) (338-0576)


    20190827_163051060_iOS.heic.jpg

    2. Either the 5 kW Stator, Generator NSN 6115-01-048-0458 (72-5250) (220-1545) with its integrated harness leads or a Complete 5 kW Generator Assembly NSN 6115-01-038-6728 (72-5200) (200-1148 )

    20190827_162846664_iOS.heic.jpg

    Please PM me with what you have or if you have a lead where I might obtain these parts.
    Last edited by Chainbreaker; 09-22-2019 at 14:14. Reason: added alternative MEP-003a wiring harness
    GEN #1 House Gen PU-751/M: 1986 MEP-002a/M116A2 w/Aux Tank & OEM cover
    GEN #2 Spare Gen PU-751/M: 1991 MEP-002a/M116A2 w/Aux Tank & OEM cover
    GEN #3 Shop/Barn Gen NF-2 Enclosure: 19XX MEP-002a w/Aux Tank
    GEN #4 Spare Gen PU-751/M: 1991 MEP-002a/M116A2 (a work in process)

    * Disclaimer - My comments on this forum are based on my opinion and my experiences only. It is your responsibility to verify any information before using or to hire a professional.

  2. #2
    4 Star General Guyfang's Avatar
    Join Date
    Dec 2015
    Location
    Burgkunstadt, Germany
    Posts
    6,301
    Thanks
    12,332
    Thanked 5,667 Times in 2,716 Posts

    Default

    Oh man, A few coke bottles would have brought more money then that little bit of wire. Don't limit yourself to just a wire harness for a 002A. A 003A harness works too. Just to shorten up a few things. I never did, simply coiled them up, wire tied them and went on my way. But its an option.

  3. The Following User Says Thank You to Guyfang For This Useful Post:

    Chainbreaker (09-22-2019)

  4. #3
    3 Star General
    Join Date
    Mar 2013
    Location
    Oregon
    Posts
    969
    Thanks
    650
    Thanked 1,010 Times in 537 Posts

    Default

    Yep, not really worth the effort for the small amount of copper they harvested. Probably someone on drugs needing a few more dollars for their next fix. Thanks for the tip on using a MEP-003a wiring harness as an alternative.
    GEN #1 House Gen PU-751/M: 1986 MEP-002a/M116A2 w/Aux Tank & OEM cover
    GEN #2 Spare Gen PU-751/M: 1991 MEP-002a/M116A2 w/Aux Tank & OEM cover
    GEN #3 Shop/Barn Gen NF-2 Enclosure: 19XX MEP-002a w/Aux Tank
    GEN #4 Spare Gen PU-751/M: 1991 MEP-002a/M116A2 (a work in process)

    * Disclaimer - My comments on this forum are based on my opinion and my experiences only. It is your responsibility to verify any information before using or to hire a professional.

  5. The Following User Says Thank You to Chainbreaker For This Useful Post:

    Guyfang (09-22-2019)

  6. #4
    3 Star General
    Join Date
    Mar 2013
    Location
    Oregon
    Posts
    969
    Thanks
    650
    Thanked 1,010 Times in 537 Posts

    Default

    I'm still looking for these parts if anyone is parting out a MEP-002a generator or knows where I might find them.
    GEN #1 House Gen PU-751/M: 1986 MEP-002a/M116A2 w/Aux Tank & OEM cover
    GEN #2 Spare Gen PU-751/M: 1991 MEP-002a/M116A2 w/Aux Tank & OEM cover
    GEN #3 Shop/Barn Gen NF-2 Enclosure: 19XX MEP-002a w/Aux Tank
    GEN #4 Spare Gen PU-751/M: 1991 MEP-002a/M116A2 (a work in process)

    * Disclaimer - My comments on this forum are based on my opinion and my experiences only. It is your responsibility to verify any information before using or to hire a professional.

  7. #5
    3 Star General
    Join Date
    Mar 2013
    Location
    Oregon
    Posts
    969
    Thanks
    650
    Thanked 1,010 Times in 537 Posts

    Default

    Still WTB a MEP-002a or 003a complete wiring harness as well as the above referenced MEP-002a generator stator or complete generator head.
    GEN #1 House Gen PU-751/M: 1986 MEP-002a/M116A2 w/Aux Tank & OEM cover
    GEN #2 Spare Gen PU-751/M: 1991 MEP-002a/M116A2 w/Aux Tank & OEM cover
    GEN #3 Shop/Barn Gen NF-2 Enclosure: 19XX MEP-002a w/Aux Tank
    GEN #4 Spare Gen PU-751/M: 1991 MEP-002a/M116A2 (a work in process)

    * Disclaimer - My comments on this forum are based on my opinion and my experiences only. It is your responsibility to verify any information before using or to hire a professional.

  8. #6
    4 Star General /Moderator doghead's Avatar
    Join Date
    Jan 2006
    Location
    NY
    MVPA
    8675309
    Posts
    26,027
    Thanks
    2,542
    Thanked 13,883 Times in 6,009 Posts

    Default

    Try Delk's?
    M817, M818, M819, M35A2 w/w, M35A2, M109, M105, M116A2, M101A2, Pioneer tool trailer, MEP-002, MEP-017A, 5ton winch shear pins, Oral-B toothbrush

    Ah Beefco Industries Northeast marketing associate

    Don't judge a fish by its ability to climb a tree

    https://www.youtube.com/watch?time_continue=12&v=T6BTcEwtmZo


  9. The Following 2 Users Say Thank You to doghead For This Useful Post:

    Chainbreaker (10-10-2019), Guyfang (10-09-2019)

  10. #7
    3 Star General
    Join Date
    Mar 2013
    Location
    Oregon
    Posts
    969
    Thanks
    650
    Thanked 1,010 Times in 537 Posts

    Default

    Bump...Hoping someone here on SS has a MEP-002a parts donor machine where that they might be willing to part-out these two parts. Or, a complete non-running unit (bad engine) for sale on West Coast.

    Delks would have to pull a wiring harness from a unit and they are still looking for a Stator or complete Gen Head. So the wait continues...
    GEN #1 House Gen PU-751/M: 1986 MEP-002a/M116A2 w/Aux Tank & OEM cover
    GEN #2 Spare Gen PU-751/M: 1991 MEP-002a/M116A2 w/Aux Tank & OEM cover
    GEN #3 Shop/Barn Gen NF-2 Enclosure: 19XX MEP-002a w/Aux Tank
    GEN #4 Spare Gen PU-751/M: 1991 MEP-002a/M116A2 (a work in process)

    * Disclaimer - My comments on this forum are based on my opinion and my experiences only. It is your responsibility to verify any information before using or to hire a professional.

  11. The Following User Says Thank You to Chainbreaker For This Useful Post:

    Guyfang (11-09-2019)

  12. #8
    4 Star General Guyfang's Avatar
    Join Date
    Dec 2015
    Location
    Burgkunstadt, Germany
    Posts
    6,301
    Thanks
    12,332
    Thanked 5,667 Times in 2,716 Posts

    Default

    There is a guy, SILPOWER in the big swap site who has a parts gen set for 700 smackers in Socal. I sent him a mail one time, and he will not part out a set. Only sell the whole kit N' kabootle.

  13. The Following User Says Thank You to Guyfang For This Useful Post:

    Chainbreaker (11-09-2019)

  14. #9
    3 Star General
    Join Date
    Mar 2013
    Location
    Oregon
    Posts
    969
    Thanks
    650
    Thanked 1,010 Times in 537 Posts

    Default

    Checked out the units for sale by SILPOWER. Apparently these units are culls that don't merit repairing to "functioning status" so they seem a bit rough around the edges. Understandably, since these are non-running/non-tested units there is no guarantee that genhead/stator or wiring harness are fully functional. If these units were closer for a pickup run, I would go look and probably take a gamble. Since I can't, the shipping is a deal killer.

    Haven't heard back from Delks on a stator/genhead. Last I talked they said they could take off a wiring harness but were still looking for a generator stator or complete gen head...

    So, still looking for these parts if they surface anywhere.
    GEN #1 House Gen PU-751/M: 1986 MEP-002a/M116A2 w/Aux Tank & OEM cover
    GEN #2 Spare Gen PU-751/M: 1991 MEP-002a/M116A2 w/Aux Tank & OEM cover
    GEN #3 Shop/Barn Gen NF-2 Enclosure: 19XX MEP-002a w/Aux Tank
    GEN #4 Spare Gen PU-751/M: 1991 MEP-002a/M116A2 (a work in process)

    * Disclaimer - My comments on this forum are based on my opinion and my experiences only. It is your responsibility to verify any information before using or to hire a professional.

  15. #10
    PSVB 3003 SCSG-G4's Avatar
    Join Date
    Jun 2008
    Location
    Lexington, South Carolina
    Posts
    4,273
    Thanks
    14,058
    Thanked 2,605 Times in 1,246 Posts

    Default

    I have a couple of 002A's that are mainly generator head and engine, with a 'small' number of other parts remaining. The problem is shipping (and getting them out of the storage location they are in). I have no idea if the gen head is worth shipping or not, as both units had been cannibalized when I got them.
    Mike KK4AIF

    M109A3 Shop Van (G4-38 )
    M35A2 Cargo Truck (G4-39)
    S-280 Commo Shelter (bunk house on M-36)
    MKT-85 Kitchen Trailer (G4-T1)
    M36A2 Cargo Truck (G4-40)
    2nd M35A2 Cargo Truck (G4-41)
    3rd M35A2 Cargo Truck (G4-43)
    2nd M109A3 Shop Van (G4-42)
    MJQ-18 Trailer (10 KW Power Plant) (G4-T3)
    MKT-85 Trailer as FST (G4-T4)
    MJQ-16 Trailer as Contact Maintenenance Body frame (G4-T5)
    M105 Tan trailer
    MJQ-18 Trailer as a bunk house under construction (G4-T2)
    M-149 Water Buffalo (G4-T6)

  16. The Following 2 Users Say Thank You to SCSG-G4 For This Useful Post:

    Chainbreaker (Today), Guyfang (11-28-2019)

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •