Max rpm , 10 kw engine

So, im thinking about another conversion. What is the max continuos rpm of the 10kw engines ?
Years ago i bought a 400hz unit to repower an 003a . I know they are built to run at 1800 rpm for generating power. But, what could they run at for lets say , 3-4 hours ? Could they run at 3600 , or is there a lower rpm limit ? Thinking about an engine from either a 112a or an 813a. Anybody know ? Thanks METALWORKER393

Any thing of 2k rpm they will start puking oil out the vent! Been there done that!

If you go back to the manufacturer they are listed up to 3600 RPM for the engines in the 803/813 units.

https://www.listerpetter.com/engines/lpw4/

Not the same engine the mep003 was a AIR Cooled onan engine.

DieselAddict said:

If you go back to the manufacturer they are listed up to 3600 RPM for the engines in the 803/813 units.

https://www.listerpetter.com/engines/lpw4/

Click to expand...

profo said:

Not the same engine the mep003 was a AIR Cooled onan engine.

Click to expand...

I was going by this in the OP:

Thinking about an engine from either a 112a or an 813a. Anybody know ? Thanks METALWORKER393

Click to expand...