• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Unimog 404 coolant recommendation

kingjon3rd

New member
7
0
1
Location
Newton, NJ
I'm about to replace all of my coolant hoses on my unimog 404. Since I'll be draining all of the coolant what is the recommend coolant to use in these motors?
 

monstermog

Member
Steel Soldiers Supporter
89
2
8
Location
Billings, MT
Use green....50/50 or 60/40 if your up north. Also if you plan on using a non nitrate make sure you clean your system out thoroughly. Carpet cleaners use a descaler...this will remove most build up...thoroughly wash out then...change your hoses...then fill. If you plan on mixing it yourself. Make sure you use distilled. (My dad still does)

IAT, OAT, NOAT, HOAT

If you can check your 404 manual.

One other option and is pricey....waterless coolant. Like Evans racing coolant. Works very well. About 4 times more expensive.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks