• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

help with m813 exhaust

IRAQVETM813

New member
2
1
1
Location
pennsboro west virginia
can anyone help with my exhaust on my M813 non turbo? the muffler had rust through under the clamp that goes around it , and a hole in the elbow where it comes up through the finder. so i was going to patch the muffler by either welding it or using patch materal, but i was thinking of doing away with the muffler and using stainless flex pipe and re doing my battery compartment and runnung exhaust like the 900 series, has anyone done this or can give me advice so i dont jack up something or cause my self some more money, ?
 

Ajax MD

Well-known member
1,567
1,414
113
Location
Mayo, MD
You're talking about eliminating the muffler altogether then? These trucks are LOUD already. I definitely wouldn't drive it without hearing protection if you do.

The output flange on my muffler has broken off. I'll be replacing the muffler and sticking with the stock configuration and that's still going to be pretty loud.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,247
1,166
113
Location
NY
New muffler, $250

New lower J pipe, $150

New upper stack, $50

Gasket, $12

All readily available.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks