Page 3 of 3 FirstFirst 1 2 3
Results 21 to 29 of 29

Thread: M939A2 Filter Numbers

  1. #21
    2 Star General davo727's Avatar
    Join Date
    Mar 2009
    Location
    Cleveland, TX , Spring , TX
    Posts
    742
    Thanks
    62
    Thanked 124 Times in 76 Posts

    Default

    That fleetguard 256476 fuel filter is the same as wix 33401, napa 3401

  2. #22
    2 Star General Mike929's Avatar
    Join Date
    Mar 2010
    Location
    DFW, Tx
    Posts
    799
    Thanks
    455
    Thanked 235 Times in 129 Posts

    Default

    Quote Originally Posted by CPDOG View Post
    hawssie

    thanks bro.
    I got it replaced, I later found out form another area on this site that during their overhauls, they sometimes added this a1 filter to the a2 trucks.

    thank again for the input.
    Here is a picture of this large canister fuel filter behind the drivers side front wheel on my M931A2 for reference.
    Attached Images Attached Images
    1990 M931A2
    1987 M35A2C (USAF)
    1972 M109A3 - 949th SUPPORT BN CO B
    M105A2 w/cover
    MEP002A w/ASK
    MEP002A
    M1102 w/ cover
    M1102 w/o cover (future camp trailer)
    SPIRIT Trailer (future generator trailer)

  3. #23
    Corporal phxmark's Avatar
    Join Date
    Nov 2013
    Location
    Glendale, AZ
    Posts
    35
    Thanks
    1
    Thanked 19 Times in 11 Posts

    Default

    I finally found the part number in the TMs and found one on ebay. The TMs are a bit confusing of which one to look in.

    Does anyone know what part I need to order to replace the missing power steering reservoir breather filter?


    Capture.JPG
    Last edited by phxmark; 06-10-2014 at 15:24.

  4. #24
    3 Star General MuleMac01's Avatar
    Join Date
    Jul 2009
    Location
    Las Vegas Nevada
    MVPA
    36599
    Posts
    831
    Thanks
    209
    Thanked 381 Times in 177 Posts

    Default

    Just a update Don't know if anyone put these filers in the list. for M923A2


    Oil filter

    Baldwin # B205


    big fuel filter driver side


    Baldwin # PF316

    Small fuel filter on engine.

    Fleet guard # FF215 this one came off my truck it's a little longer and had a metal drain peacock on the bottom. or..
    Fleet guard # FS 1251 this one is a little bit smaller but has a plastic peacock on the bottom. both work.
    1951 Reo M275 Gas tractor
    1964 BMY M274A2 mule
    1986 Cucv M1028a1
    1986 cucv m1009....... sold.......
    1991 M923A2 5-Ton cargo truck
    ----- M101A3 Trailer
    ----- M105A2 Trailer
    2007 M105A3 Trailer
    1983 M118A1 6 ton Semi trailer flat bed
    MVPA# 36599

  5. #25
    Sergeant TruAg's Avatar
    Join Date
    Oct 2014
    Location
    Huntsville, Texas
    Posts
    66
    Thanks
    22
    Thanked 26 Times in 16 Posts

    Default

    This maybe listed somewhere else or just be a dumb question, but what about fluid types? Oil, transmission and power steering? M923A2 truck
    Thanks

  6. #26
    Corporal
    Join Date
    Dec 2015
    Location
    Rio Vista,Ca
    Posts
    48
    Thanks
    1
    Thanked 11 Times in 9 Posts

    Default

    Search Lube order on this site. Some one posted a link. I downloaded it and printed it.

  7. #27
    Private
    Join Date
    Aug 2017
    Location
    Lynnwood, WA
    Posts
    14
    Thanks
    1
    Thanked 4 Times in 2 Posts

    Default

    For those of you who wish to use all baldwin filters on your m939a2 ie(8.3l cummins) with automatic transmission. here is a list. Tranny filters etc there is plenty of information but for the most part baldwin filter numbers are scattered across different post etc.

    Fuel water separator - bf1226

    Big fuel filter driver side wheel well - pf316

    Hydraulic filter spin on, upper left side wheel well passenger side. - bt230

    Main oil filter - b205

    Coolant filter - b5134


    If you guys decide to install a coolant filter, the cast iron kit from eBay or Amazon is cheap and that baldwin filter will screw right up.

    Engine Oil is 15-40 i use delo 400sde in all my trucks. You can get it from costco for $30 I buy 9 gallons. Or 2 boxes.

    Antifreeze just regular green concentrated antifreeze from napa, autozone etc, just make sure it's quality green, I buy 6 gallons antifreeze and 6 gallons or one box of distilled water, I buy mountain mist distilled water from Costco. You can buy 6 gallons for about $5 even.

    The sca additive is called napa cool -4058 used to treat the antifreeze after replacing. I usually buy the 64floz bottles, Highly recommend getting coolant test strips that test ph, nitrite and freeze point. You can get them from napa or Amazon.

    Gear oil for all the diffs and anything else that uses 80-90w from napa, buy 5 gallon jugs cheaper, and you will need it all - np75213

    Hydraulic oil aw-46 you can usually get it from Costco about $30 per 5 gallons, use for crane etc on 936a2.

    Tranny oil, this is personal preference but I use the napa 85-405 heavy duty tractor, hydraulic and transmission oil, it meets Allison c4 requirements etc. ( 10w oil ) Get them in 5 gallon jugs. You should only need 1, 5 gallon jug to do the oil change in the automatic tranny.

    Power steering oil, you can use the same tranny oil above for power steering 85-405 napa.

    For those of you who have a starting fluid injection system, if you need a new bottle the part number is quick start diesel lp-535 you can also get the zerostart bottle from o'rilley auto parts # 8200327 I am sure auto zone and napa could cross reference that.


    I only use baldwin oil filters, as I have a ton of experience with different brands and can tell you baldwin will stand up to the abuse. I use them in my marine applications and that is a brutal environment. So I decided to change all trucks also to baldwin a long time ago.
    Last edited by mdss; 01-18-2018 at 17:33.

  8. The Following User Says Thank You to mdss For This Useful Post:

    acolesurf (04-15-2018)

  9. #28
    Private
    Join Date
    Dec 2015
    Location
    Manchester, NH
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    Could you please repost that pic? It doesn’t seem to be attached to the thread anymore.

  10. #29
    I'm the dude, man. Steel Soldiers Vendor simp5782's Avatar
    Join Date
    Jun 2011
    Location
    Memphis, TN
    Posts
    7,231
    Thanks
    106
    Thanked 7,092 Times in 3,113 Posts

    Default

    Quote Originally Posted by BMcCloud View Post
    Could you please repost that pic? It doesn’t seem to be attached to the thread anymore.
    Which picture are you seeking?

    All part numbers are located here. The 939a2 specific parts are located at the bottom of the spreadsheet

    https://docs.google.com/spreadsheets...t?usp=drivesdk
    2008 F-250 6.4L Powerstroke
    1984 AM General XM923A4 ( Big Cam III NTC-400, HT4B turbo, Intercooled, #10 button, Dual fuel Line setup - MRAP Aluminum Radiator - 7" Ram Air Intake system - Dual 115 gallon tanks - Air Conditioning - 145amp alternator - Puradyn Oil Bypass system, CAT 7155 16speed transmission, Oshkosh 55000 Transfer Case, riding on 16.00 AT-3s on HEMTT wheels. )
    M923A1
    M931A2
    M1083
    M1078
    M796 Bolster
    M322 Equipment Trailer
    MEP-804A


    901-318-8353 for Help in and or around the Memphis area or transporting in the southeast. Text me first before calling.

    Tires (HMMWV, 395s, 1600s) and Transportation Vendor

    Wes

    Videos at https://www.youtube.com/results?search_query=5782simp

    https://www.youtube.com/channel/UCTd...D4dOJidPFnmYGA

Page 3 of 3 FirstFirst 1 2 3

Similar Threads

  1. Deuce filter numbers
    By Hookin1 in forum The Deuce
    Replies: 3
    Last Post: 12-05-2013, 12:10
  2. Yes Im Posting ANOTHER Filter Thread!!
    By devilman96 in forum Deuce Modification and Hot-Rodding
    Replies: 74
    Last Post: 11-26-2011, 16:28
  3. Filter numbers
    By Engine5 in forum 5-ton and up
    Replies: 2
    Last Post: 01-16-2010, 10:04
  4. Coolant Filter Install on M939A2
    By steelsoldiers in forum 5-ton and up
    Replies: 3
    Last Post: 10-30-2009, 07:50
  5. Replies: 5
    Last Post: 08-29-2008, 07:45

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •