• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

1008 questions

From the CUCV Wiki:
Brake Fluid

  • Fluid is DOT5 silicone only. CAUTION: Some of these vehicles may have been filled with DOT3. There are numerous arguments for using either kind. However, do NOT mix them.
  • Level should be ¼” below lowest edge of each filler opening in master cylinder
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,247
1,168
113
Location
NY
If you read the info on the top of your master cylinder cover, it clearly states, use dot5 only.

Also, please take note of the forum you are posting in, and try to post in the correct forum.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks