-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Flushing the transfercase
- Thread starter caladin
- Start date
Cucvnut
Well-known member
- 3,802
- 51
- 48
- Location
- Carver, Oregon
On the t case on the back you have 2 big bolts top is fill bottom is drain. It takes dextron same as a th400. Fill it back up till you can feel fluid between the first and second knuckle
WARWAG
Active member
- 1,487
- 22
- 38
I will be doing this as well when I get back home.
rnd-motorsports
New member
- 905
- 3
- 0
- Location
- Evart,Michigan
not a real good pic but the top or number 1 is the fill and bottom number 2 is the drain You may have a rare 208 I have seen a couple with replacement back half's with the fill and drain ports not drilled and tapped
Attachments
rnd-motorsports
New member
- 905
- 3
- 0
- Location
- Evart,Michigan
This is a picture of a 208 with no fill or drain plugs they are out there this on is in a 1009 
Attachments
WARWAG
Active member
- 1,487
- 22
- 38
Cucvnut
Well-known member
- 3,802
- 51
- 48
- Location
- Carver, Oregon
5 quarts
WARWAG
Active member
- 1,487
- 22
- 38
From what ive found on the web about one inch below the fill plug. OR between your 1st and
2nd knuckle as CUCVNUT said.
2nd knuckle as CUCVNUT said.
Cucvnut
Well-known member
- 3,802
- 51
- 48
- Location
- Carver, Oregon
yep!
nudewheeler
New member
- 41
- 1
- 0
- Location
- Tucson, AZ
30mm socket for the NP208 drain and fill plugs. The only 30mm heads on the t-case...
This is a picture of a 208 with no fill or drain plugs they are out there this on is in a 1009
What would you do in this case. Have to drop the transfercase?
DokWatson
New member
- 359
- 0
- 0
- Location
- Wasilla, Alaska
Huh? I can see both of them.This is a picture of a 208 with no fill or drain plugs they are out there this on is in a 1009
And I know where that picture was posted originally...they were commenting on how BIG the drain and fill plugs are.
Last edited: