Page 3 of 4 FirstFirst 1 2 3 4 LastLast
Results 21 to 30 of 39

Thread: LEO/FD HMMWV Check List & Part Numbers

  1. #21
    4 Star General TedG's Avatar
    Join Date
    Dec 2006
    Location
    MI USA
    Posts
    1,134
    Thanks
    59
    Thanked 220 Times in 123 Posts

    Default

    Attention new m998/hmmwv owners:
    I thought I remind new owners that as mentioned in this sticky, there is a control box and harness you do NOT want to use. The control box and harness is made by LAU and the harness is 6110-01-446-7124, #12379865. I have seen them for sale on e-a- and they should be avoided.
    Too many vehicles to list and lots of parts!

  2. The Following User Says Thank You to TedG For This Useful Post:

    Jakob1944 (01-06-2017)

  3. #22
    Private
    Join Date
    Jan 2016
    Location
    SD
    Posts
    4
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    I have been hunting for glow plugs for my 6.5L and have looked hi and low. No one seems to post a actual working numbers for a real 24V Glow Plug so I thought I would share my findings. Good luck with a parts store finding anything. I called the manufacturer and Wellman is sold under Diesel RX brand. The number is DRX00115 this has the bullet connector and is 24V anti swelling. This plug is not self regulating so it is possible to fry it. If you can find them the AC - 15G is the other correct number with the GM5614017 number for real 24V glow plugs. I do believe that the AC15G is discontinued you may find new old stock. The only manufacture that I can find still making 24V bullet connector glow plugs is Wellman/Diesel RX.

    The numbers AC-62, 11, 9 may fit but to my understanding they are all 12V and will not work. I could be wrong... I believe these are all spade connectors so you would have to do some wiring conversion from bullet type connector to spade.

    So find some DRX00115 for your HMMWV 24V system. I am pretty sure this is what people are selling.

    Anyone know of other options with part numbers?

  4. #23
    Private
    Join Date
    Jan 2016
    Location
    SD
    Posts
    4
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    I got my boots from O'Reilly Auto Parts last month when I had a tore boot. Look up boots for a 1993 to 1998 Mercury Villager they look exactly like stock and fit perfect. Now word of advice do not remove the outer joint as you will brake the snap ring on the outside of the shaft. These kits will not come with a new snap ring. The new boot kits form kascar or another HMMWV place will come with both snap rings in the outer boot kit. I got lucky and after going to 6 auto parts stores on guy had a set of axle half shaft snap rings collecting dust in the back and one worked. So disassemble the inner cv end and remove the boots by sliding the outer boot off the shaft that way. No broken snap rings and boots get fixed. You will need a CV strap clamper, the twist kind.

    You can also buy new axles from your local Sturdavents Store
    Right Front NCV82075 28 9/16"
    EDIT: (I had the wrong number here. It is correct now) Left Front NCV82074 23 3/16"
    Rear both NCV82999 26 1/2" Compressed

    I personally know the rear from this company has to be 26 1/2" stock to work. I called the company and when they first started making these they were 2 inches long. So if you order a rear using this part number if it is really old stock in the warehouse it will be to long. Have them measure the compressed length of the half shaft first before they ship it to you. They are around $100 bucks plus shipping and new. Worked for my 89' M998.
    Last edited by gringeltaube; 01-26-2018 at 08:57.

  5. The Following User Says Thank You to johnpp77 For This Useful Post:

    orgnal (07-14-2017)

  6. #24
    Private
    Join Date
    Jan 2016
    Location
    SD
    Posts
    4
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    I was looking through my notes and I found this. Inner Boot O'Reilly number 614-002, Outer Boot 614-001 These numbers should be correct for the Half shaft inner and outer boots.

    EDIT: This is for the 10K half shaft not the HD ones.
    Last edited by johnpp77; 07-19-2017 at 13:26.

  7. #25
    Private
    Join Date
    Jan 2016
    Location
    SD
    Posts
    4
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Other Items on my notes list. My Power Steering gear was leaking oil so I needed to change that out. I called everywhere and they could find them but no stock anywhere.
    Power Steering Gear:
    MasterPro 504-0107
    AC Delco 3600167

    Again I am not 100% sure anymore on these numbers but that's what was on my notes it that helps anyone.

  8. #26
    Sergeant Major
    Join Date
    Apr 2013
    Location
    auburn,indiana
    Posts
    178
    Thanks
    1
    Thanked 7 Times in 5 Posts

    Default

    6.5 intake manifold set Napa/felpro # MS 91585 includes injection pump gasket

  9. #27
    Corporal dskupi01's Avatar
    Join Date
    Mar 2017
    Location
    Detroit, mi
    Posts
    39
    Thanks
    1
    Thanked 25 Times in 13 Posts

    Default

    There’s one edit I would recommend. Although the wix51061 oil filter funtions, it does not have the anti drain back feature (back flow preventor). The wix 51060 has this feature. I’ve found the time for the oil pressure to pump up on startup is significantly longer with the 51061 filter after leaving overnight with 15w40 oil. I didn’t time it, but several seconds longer each start. Presumably, some oil drains back from the gallery. Not sure if this means my oil pressure regulator stuck? I see no reason to starve the oil pressure to the main/rod bearings if not needed. Given both are typically stocked at auto stores carrying wix, i’d only ever use the wix 51060 (if wix is your choice). The anti backflow in the 51060 holds the oil in the galleries, and oil pressure pumps up much faster.
    Last edited by dskupi01; 12-03-2017 at 21:15.

  10. The Following User Says Thank You to dskupi01 For This Useful Post:

    98G (08-27-2018)

  11. #28
    4 Star General ken's Avatar
    Join Date
    Jan 1970
    Location
    Houston Texas
    Posts
    2,489
    Thanks
    107
    Thanked 449 Times in 258 Posts

    Default

    For V-belts with 4 belts and a 60AMP Gen.
    PS Gates 7500
    Alt Gates 7640.
    For U-joints the front drive shaft on mine were smaller than the rear drive shaft. The bearing cup diameters are the same but the cross is shorter on the front shaft.
    FRONT Spicer 5-5153X 3 EA
    Carrier Bearing Spicer 211415X
    Rear Spicer 5-213X
    Kenny
    1966 M35A2C
    1986 M105
    1952 M37
    1966 M101
    1986 M1028A1
    1988 M101
    1993 M998
    MEP003
    MEP002

  12. #29
    4 Star General ken's Avatar
    Join Date
    Jan 1970
    Location
    Houston Texas
    Posts
    2,489
    Thanks
    107
    Thanked 449 Times in 258 Posts

    Default

    6.2 and 6.5 NA Exhaust flange donut gaskets:
    Fel-Pro 60556 Manifold to Y-Pipe 2 Each
    Fel-Pro 60718 Y-Pipe to muffler pipe. 1 Each.
    Kenny
    1966 M35A2C
    1986 M105
    1952 M37
    1966 M101
    1986 M1028A1
    1988 M101
    1993 M998
    MEP003
    MEP002

  13. #30
    Sergeant Major
    Join Date
    Nov 2016
    Location
    SoCal
    Posts
    175
    Thanks
    100
    Thanked 108 Times in 49 Posts

    Default

    Can we roll these up into the top document? Can the top document state last updated? (I do this at work as well.)
    1989 M998
    S-788 Shelter, Sitting on a modified M116 ChassisL 3/4 Ton, Two-Wheel Trailer
    M1038 that needs a bit of work before I sell it.
    Donor M1038 (wrecked!)

    “Faliure is not an option.”
    Gene Kranz

Page 3 of 4 FirstFirst 1 2 3 4 LastLast

Similar Threads

  1. Buying my first deuce ! need a check list please, NEW MEMBER
    By toomey200 in forum Deuce Modification and Hot-Rodding
    Replies: 20
    Last Post: 02-25-2013, 16:13
  2. List of part numbers for NHC oil cooler change
    By ranchhopper in forum 5-ton and up
    Replies: 6
    Last Post: 06-07-2012, 23:38
  3. List of semi trailer M numbers and use?
    By rubicon_in_ga in forum Trailers
    Replies: 4
    Last Post: 11-16-2010, 17:26
  4. My pickup list for others at aberdeen. Please check
    By ida34 in forum Upcoming Events
    Replies: 1
    Last Post: 05-06-2008, 22:23

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •