• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

12K half shaft part numbers??

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
5,884
8,196
113
Location
Papalote, TX
Sorry if this is redundant, I did search and did not find the answers.
SO for 12K hubs and vented rotors the half shafts are
LF= 2520014214588, RCSK17028-3
RF= 2520014231947, RCSK17028-2
REAR= 2520014214589, RCSK17028-1
Also the 12K uses the same boot in and out?
These would be A2 shafts YES??
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
5,884
8,196
113
Location
Papalote, TX
I found it all in the TM's
I did too, that is where I got the numbers, BUT there are evidently MORE that one set of 12K half shafts, some with vented brake rotors and some with solid rotors, the TM did not specify which these are, I just want to make sure before I plop down a large amount of cash, but THANKS for your HELPFUL input,,,
 

Coug

Well-known member
Steel Soldiers Supporter
2,831
4,035
113
Location
Olympia/WA
A2 are vented rotors. The part numbers for them are the ones in the standard parts manual, not the ECV parts manual. None of the others will be in TM 9-2320-280-24P (books one and 2)
Unless you have an ECV or REV truck then that's where the numbers would be.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks