CCKW Drag Link Ball Joints

Steel Soldiers is supported by:

Foxtrot Oscar

New member
114
0
0
Location
Auckland, New Zealand
Dear All,
We have a CCKW 352 (SWB) truck at the museum where I volunteer.

She has worn Ball Joints on the Drag Link and I'm looking for a source of supply for either new Ball Joint repair kits or a complete Drag Link assembly.

Our are worn beyond acceptable adjustment unfortunately.

I've had a search around and followed the links from:
http://www.steelsoldiers.com/showthread.php?82869-CCKW-part-sources
to no avail.
Also I have an email en-route to John Bizal at Midwest Military today.

Any guidance you could give would be most appreciated.
Many thanks in advance.
John.

Edit. I should add this truck has the Timken Split axles - Whether that makes any difference I'm not sure. Thanks
 
Last edited:

Foxtrot Oscar

New member
114
0
0
Location
Auckland, New Zealand
Update. Mr. Bizal was unable to assist directly but he kindly gave me a couple of alternate suppliers which were very helpful. Looks like we might be able to go to the ball (joint) after all!
Thanks for reading anyway.
 
Top