- 146
- 186
- 43
- Location
- Charleston, SC
Found this interesting little failure while greasing the 917 this week. Worth noting.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Check your front spring mounts (920 series)
- Thread starter Abrant23
- Start date
I've seen that before.
The other issue is that some of the cab/engine mount brackets are not open at the bottom . I know on the 915A1s they are for sure not open. I've seen some 916s that weren't
But they fill with water and it pools in the bracket and can't get out.
Not too good a pic of the inside or the outside part but you can see the rust built up on that 915a1
The other issue is that some of the cab/engine mount brackets are not open at the bottom . I know on the 915A1s they are for sure not open. I've seen some 916s that weren't
But they fill with water and it pools in the bracket and can't get out.
Not too good a pic of the inside or the outside part but you can see the rust built up on that 915a1
Attachments
- 146
- 186
- 43
- Location
- Charleston, SC
- 569
- 1,267
- 93
- Location
- Chesterfield, Mi.
I assume these issues would apply to my M934. As soon as I am able, I have some crawling around to do…
Nah they are open and solid mounts for the most part