bigburb11
New member
- 29
- 0
- 0
- Location
- Detroit, MI
Hi all,
I'm going through the electrical gremlins on my new truck. Can't wait til they're sorted out.
My parking lights don't work (front)... I haven't finished troubleshooting, but connections and grounds at the lights look good.
I noticed that I don't have provisions for a parking light fuse in the fuse box as indicated in the TM. Was that for ambulance versions only? I have M1008.
Also,
My printed circuit board on the back of the dash cluster is kaput. Open circuits at the plug area on almost all connections. Is GM 1984 K30 printed circuit board the same as M1008? Are there any other places to get this new? Is there some type of tape that can be used to repair the issue?
Any feedback as always is appreciated.
-Scott
I'm going through the electrical gremlins on my new truck. Can't wait til they're sorted out.
My parking lights don't work (front)... I haven't finished troubleshooting, but connections and grounds at the lights look good.
I noticed that I don't have provisions for a parking light fuse in the fuse box as indicated in the TM. Was that for ambulance versions only? I have M1008.
Also,
My printed circuit board on the back of the dash cluster is kaput. Open circuits at the plug area on almost all connections. Is GM 1984 K30 printed circuit board the same as M1008? Are there any other places to get this new? Is there some type of tape that can be used to repair the issue?
Any feedback as always is appreciated.
-Scott