NumberTwo
New member
- 2
- 4
- 3
- Location
- Peoria, AZ
Any help with parts and/or part numbers to do a full wheel hub rebuild job. I've looked around, but I'm not sure exactly what is needed and where to get the parts. Thanks in advance.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Help with M1101 wheel bearing rebuild
- Thread starter NumberTwo
- Start date
- 9,604
- 1,485
- 113
- Location
- mid- michigan
Read through this thread https://www.steelsoldiers.com/threads/m1101-wheel-bearing-seal-part-numbers.105032/
M1101 Trailer wheel bearing maintenance
We purchased a 2011 M1101 from GL and I wanted to remove the wheels and check if the bearing were greased properly. They were. Here are the original bearing makes and numbers. Inner bearing Koyo Hi-Cap 25580-N Outer bearing Koyo Hi-Cap 14125A Timken also makes the above bearings with the...
www.steelsoldiers.com
cucvmule
collector of stuff
- 1,139
- 575
- 113
- Location
- Crystal City Mo
Most time the numbers are on the seals. Unless the bearings are running without grease it is doubtful that they need replaced. Remove, clean and repack with quality wheel bearing grease.
And make sure that you tighten, then adjust bearing properly.
And make sure that you tighten, then adjust bearing properly.