• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M274 A5 Oil Leak

douglr1961

New member
1
0
0
Location
princeton/wi
Good day,
My mule is leaking (pushing out) oil on the top of the engine (above the oil filter, behind the shroud and adjacent to the return line). It's difficult to see exactly where it's coming from.

Anyone have experience with this?

Thanks for any info/assistance,
Randy
 

nickd

Active member
859
36
28
Location
Newport, Delaware
It sounds like your leak is coming from the 2 oil lines located on the top of the motor under the metal shrouds. Remove the accelerator cable from the governor and remove the top cover. Remove the remaining metal shroud on the left top side of the motor. It takes some angled screw drivers to remove the sheet metal screws. Under that shroud you will see 2 short oil lines bent wrenches and or crows foot wrenches will be required to tighten them up. Use two wrenches on each fittings to ensure they are tight. Hope this helps.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks