• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M38 / M38A1 civilian cross reference? Wheel cylinders?

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,120
113
Location
Athens, Ga.
Is there an M38 / M38A1 civyy cross reference sheet out there on the web like the excellent one we have for the deuce? I have a bunch of customers with Jeeps and I'd like to be able to buy stuff like wheel cylinders from Napa when possible.

And although I'm looking for an overall sheet with stuff like points, belts, filters, etc., I am currently dealing with an M38 with a leaking rear wheel cylinder, so that I need sooner than later.

Thanks
 

sigo

Lieutenant Colonel
Steel Soldiers Supporter
1,684
353
83
Location
Leavenworth, KS
I’ve only seen piecemeal parts cross reference sheets, nothing comprehensive. I’ve been building my own list whenever the opportunity presents. It’s been awhile since I rebuilt the rear brakes on my M38 but I think the rear was stock. My front brakes aren’t. Here’s what I had in my notes for rear cylinder reference:
Rear Cylinder
Wagner 16535
NAPA 16535
EIS E16535
Bendix 3188
 
Last edited:

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,120
113
Location
Athens, Ga.
I’ve only seen piecemeal parts cross reference sheets, nothing comprehensive. I’ve been building my own list whenever the opportunity presents. It’s been awhile since I rebuilt the rear brakes on my M38 but I think the rear was stock. My front brakes aren’t. Here’s what I had in my notes for rear cylinder reference:
Rear Cylinder
Wagner 16535
NAPA 16535
EIS E16535
Bendix 3188
I think 16535 is what I found, along with another number. Apparently they're the same 3/4" bore and one has a 7/16" brake line and one has a 3/8". Gonna' order one tomorrow.

Also, this is supposed to be good but I wonder how up to date it is: https://www.portrayalpress.com/ProductDetails.asp?ProductCode=620-2244
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks