• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

John Mc's latest activity

  • John Mc
    John Mc reacted to Redleg130's post in the thread Electrical system with Like Like.
    This project was successful in that it works and I think it will be durable. I am not completely happy with the outcome, it isn't as...
  • John Mc
    John Mc replied to the thread New2Me 1961 M37.
    YEs. An ohmmeter might tell you that a coil is bad, but it can't tell you whether it's good.
  • John Mc
    John Mc replied to the thread Electrical system.
    Is there no kind of electrical terminal duplicator or splitter that will work? (Something like what you see on modern car battery...
  • John Mc
    John Mc replied to the thread New2Me 1961 M37.
    Do you have power to the distributor?
  • John Mc
    John Mc replied to the thread Electric M37.
    Did you mean to include a link or something with that?
  • John Mc
    John Mc replied to the thread Headlights OR parking lights ???.
    From what I can see from the internal wiring diagram for the 3 lever switch, and the wiring diagram for the M37, it does not appear...
  • John Mc
    John Mc replied to the thread Electrical system.
    When my headlights and blinkers started acting flaky, I traced it back to a bad socket in the connector that attaches to the three-lever...
  • John Mc
    Sometimes you see an interesting post and have to respond - only noticing afterwards how old it is. On the subject of oil, I have been...
  • John Mc
    John Mc replied to the thread M37 vs M37B1.
    I remember which is which because both the names and the materials used are in chronological and alphabetical order: Early M37 .. Later...
  • John Mc
    John Mc replied to the thread M37 vs M37B1.
    3rd and 4th gear were synchronized in the original M37 transmission. So if you started out in 2nd gear, you could shift right up without...
  • John Mc
    John Mc replied to the thread New2Me 1961 M37.
    I can't imagine doing that, as long as you have the ratchet fully seating in the plug. The spring-loaded retention ball on some ratchets...
  • John Mc
    John Mc replied to the thread New2Me 1961 M37.
    On some of these, the tool to pull the oil drain plug is just a 1/2" drive ratchet with no socket on it.
Top