Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Looks a bit different then a hunter camfire heater but they're still 3 pins. If you're good with wires figure out which one is ground and which 2 you cross to turn on the heater. The thermostats are just on-off switches. The circuit should be 24v like other heaters but check it.
I have a bunch...
I have a centrifuge to process my WMO and it does a great job pulling all the crud out. I would not put uncleaned oil in anything, having found that out after clogging the tip in my hunter camfire heater and flooded it with oil.
For a heater you can run 100% WMO, no gas is needed. For engines...
I have maybe 20+ Nordic air ECUs and none of them have been drilled like yours have. Most have been drained and some had their service ports left open. I just vac them out and fill, and they function 75% of the time. Meaning 1 of 4 have some sort of issue that's not worth fixing. Mine are r22...
I also use a 40 gallon spot sprayer from tractor supply with a bleach sprayer 12v pump from northern tool. This coupled up with a pressure washer makes short work of even the worst mold
The material is vinyl coated polyester, or called PVC fabric (Poly Vinyl Chloride).
Whenever I wash tents, and they come black with mold sometimes, I start out with a 20% bleach solution and go up to 50% for stubborn areas. At 50% it can start taking the color out of the vinyl, especially on...