• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Eaglhawk

    I hate to ask, how do you get 14.00's to inflate on ODIron wheels?

    Also just to be safe, I wrap a chain around the tire and through the center of the rim at 0,90,180, and 270 degrees for larger tires. Also make sure the inside of the tires are clean and not full of combustible goo of some sort that can explode like 91W350's post of the tire guys explosion.
  2. Eaglhawk

    I hate to ask, how do you get 14.00's to inflate on ODIron wheels?

    I have used a way to get the tires to seat the bead when ether is not available but an oxygen acetylene torch is handy. First start up your torch and get a neutral flame. Pop off the flame by pushing the head into a piece of wood. Then put the torch head inside the tire for a few seconds to fill...
  3. Eaglhawk

    5 Ton tractor to dump conversion

    I used a chain around the dogbone to the frame to move it to where it can be repaired
  4. Eaglhawk

    5 Ton tractor to dump conversion

    I really really don't like the dogbones on the 2 1/2 tons and the 5 tons. If the rubber fails and the dogbone pulls free it can cause catastrophic failure with the separated driveline swinging around and taking out the brake lines. This has happened twice to me and once caused me a wreak when...
  5. Eaglhawk

    5 Ton tractor to dump conversion

    Thanks everyone for the input. The idea of swapping the dump over is because the trucks drivetrain is pretty beat up. Jack overloaded it many times and the ram lifting system was replaced when he overloaded it once and sheared the dump off once. I know because I had to re-weld the bed...
  6. Eaglhawk

    5 Ton tractor to dump conversion

    Has anyone put the dump components from a M51 Dump truck onto a M818 Tractor truck? I have Jack Tomlin's old beat up M51 and wish to put the dump components on a new M818. It looks like the rear frame length is the same so It should be straightforward to remove the 5th wheel components and put...
  7. Eaglhawk

    EFS Surplus yard In Grantsville, Utah, 20 minutes from Jack Tomlins old yard..

    I try to save as much stuff from going to the scrap yard as I can. Parts donated are available to everyone, no charge if personally picked up.
  8. Eaglhawk

    Won an M1083A1 - 1900 mile recovery trip soon! (ND to CA)

    My surplus yard is 7 miles off I-80 by Grantsville utah, just 40 minutes outside Salt lake city on the way to Wendover NV. If you have problems in the area let me know and I will help any way I can.
  9. Eaglhawk

    EFS Surplus yard In Grantsville, Utah, 20 minutes from Jack Tomlins old yard..

    Well, it has been a while. Last 2 years were tough with my wife's cancer and trying to finish our house. My wife is now doing great and about 85% done with the house. With huge strain on finances I have partially restarted the yard to prepare and sell some of the trucks and with some help from...
  10. Eaglhawk

    EFS Surplus yard In Grantsville, Utah, 20 minutes from Jack Tomlins old yard..

    Well, it has been a while. Last 2 years were tough with my wife's cancer and trying to finish our house. My wife is now doing great and about 85% done with the house. With huge strain on finances I have partially restarted the yard to prepare and sell some of the trucks and with some help from...
  11. Eaglhawk

    EFS Surplus yard In Grantsville, Utah, 20 minutes from Jack Tomlins old yard..

    No M1101/2 parts only the older 3/4 and 1 1/2 ton trailers and pretty much only the complete trailers, no parts except lights or rims.
  12. Eaglhawk

    M59 and M342, what are the stock differences?

    Thanks for the info, mine is a M342. your pic of the M59 is cool... I like how short it is. I looked 9 years to find mine at a local GSA yard... I paid $4500 for it, the deuce trucks are the only big trucks that can make it up my mountain road. I have a few 5 ton dumps at the bottom but they are...
  13. Eaglhawk

    77 M880 Won't Stay Running When Warmed up Under Load

    1) Check timing 2) Carburetor rebuild not cleaned properly - I always had problems rebuilding the old carbs on these 318's and 360's. You can use solvent to clean them but that never fixed the metal oxide build up on the internal pathways from years of oxidation due to moisture...
  14. Eaglhawk

    EFS Surplus yard In Grantsville, Utah, 20 minutes from Jack Tomlins old yard..

    Yes, Mark those are them give me a call, thx
  15. Eaglhawk

    M59 and M342, what are the stock differences?

    Could someone tell me the stock differences in the M59 and the M342? From the limited, low-res pictures I have found on the web they basically look the same. I have one that I picked up from GSA but at the moment I am not sure which one it is, but I do know that it has the multifuel turbo in it...
  16. Eaglhawk

    Brake fluid Question

    I have had similar strange things happen to my m35a2 and others... I think the hydro-pack (air over hydraulic) piston/diaphragm is not moving fully back keeping a little fluid inside itself. I found the more you regularly use the truck these problems go away.
  17. Eaglhawk

    EFS Surplus yard In Grantsville, Utah, 20 minutes from Jack Tomlins old yard..

    I currently have an ad listing for Gamma Goat tires and M151 Jeep tires on KSL.COM I am really surprised, the demolition derby people are buying a lot of my M151 tires for their crash cars.
  18. Eaglhawk

    Gama gama hey!

    Are you good on tires/wheels? I am having a sale on them at my EFS yard..
  19. Eaglhawk

    Static Pinion Angle Thoughts?

    Hey, just saw this thread... Rick... Take a step back from your blazer from the side and look to see If your rear wheels are centered in the wheelwell. Looking at how far your yoke is pulled out of the t-case, I will bet your wheel looks too far to the rear and the center pin is too far back...
  20. Eaglhawk

    EFS Surplus yard In Grantsville, Utah, 20 minutes from Jack Tomlins old yard..

    I have been super busy this summer. My Surplus yard is undergoing a huge upgrade and I am still working on my house project. I am having a sale on my Gamma Goat wheels/tires and M151 wheels/tires for July. Thanks everybody and I pray everyone had a good July 4th! Alan -EFS yard (801)-808-4696
Top