• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. D

    M817 Dump with no brakes

    I purchased an M817 a few years ago and I am finally getting around to fixing it. It had no brakes when I picked it up from GL. It runs good and makes air pressure, but the brake pedal goes to the floor. I have added fluid to it, but I still get no pressure on the pedal. Is there...
  2. D

    clutch problems after attempted tow in 5 ton wrecker

    Thanks for the help. Yes, I forgot the rear clutch handle. I would like to claim rookie mistake, but I have had that truck for 6 years. Thank You, Jim
  3. D

    clutch problems after attempted tow in 5 ton wrecker

    Yes, I did use the declutch lever. If that is it I will feel like I won the lottery. I will post tomorrow what I found. Once, again thank you for your time and help. Jim
  4. D

    clutch problems after attempted tow in 5 ton wrecker

    I would appreciate any help with a possible diagnosis on my m62a2. I tried to help pull out a stuck 10 wheel dump truck today. I had to be towed away from the still stuck dump truck with a clutch that does not return to its prior position. The clutch pedal now sits one to two inches from...
  5. D

    Bob 5 ton with 2.5 hardware?

    Does anyone know the weight difference between the cummins and the ldt. My truck doesnt have the winch so would the weight of a cummins be about equal to the ldt and a front winch? Thanks Jim
  6. D

    Bob 5 ton with 2.5 hardware?

    It does not have a LDS. It has the cummins in it. I think from all the great information I received that I will be going with the lighter springs on the rear only. Jim
  7. D

    Bob 5 ton with 2.5 hardware?

    I was thinking of useing 2.5 springs on the rear. I never thought of changing the fronts. Jim
  8. D

    Bob 5 ton with 2.5 hardware?

    I have a 5 ton flatbed I want to bob. I was wondering if it was possible to bob it with 2.5 ton parts. I was thinking if they fit, it would provide a slightly softer ride. I dont need to be able to haul heavy loads, so I wouldn't mind a loss in carrying capacity. Thanks for any help...
  9. D

    The new guy from Central Calif.

    I have a wrecker, dump truck, and a flat bed. Jim
  10. D

    The new guy from Central Calif.

    I live in merced, I have three five tons. You are welcome to come look them over and talk trucks. Jim
  11. D

    Looking for a Diesel Motorcycle M1030 for my collection

    I think I remember GL selling a few about a year ago. Jim
  12. D

    multifuel head gaskets

    I got to do them twice in 2009. The first time I used the old surplus gasket. The second time I used the high dollar version. Jim
  13. D

    Pawnshop paints a CUCV...

    I have painted two five tons with an airless house sprayer. I am pleased with the results. It certainly goes alot faster than the gun I use to paint cars. Jim
  14. D

    MEP-003 automatic shut down?

    Does the MEP-003 have an automatic shut down system? I was out of power this last weekend and it was working great. It ran for a little over 12 hours and then shut down. I used my old small generator for a little bit and then the power went on. I havent even had a chance to look it over...
  15. D

    What is the best engine they put in a Deuce?

    If it was me, I would pay off the loans first. Jim
  16. D

    M817 from Barstow, Military disabled brakes

    The GL rep said the military disabled the brakes to keep anyone from useing them. There were about 7 dump trucks up at the same time. All of them had the same thing done to them. I had to unload it from the trailer up hill and then I quickly got a tow bar on it so I could safely move it...
  17. D

    M817 from Barstow, Military disabled brakes

    I just got my third 5 ton yesterday. I have been haveing a great time playing with and useing them. The most recent one is a M817 that I picked up from Barstow. It is in good shape minus any brakes includeing the parking brake. Tim from GL told me that all of the trucks that they had...
  18. D

    MEP 003 fluctuating voltage

    I finally got it working. It was the voltage regulator. I have a friend who helps me out and I let him rewire the new regulator. I gave him the schematic that came with the new board and he wired it up. I should have double checked his work. I rechecked it yesterday and after rewireing...
  19. D

    MEP 003 fluctuating voltage

    Thank you again Speddmon if you lived closer I would drive over and buy you a beer. I really do appreciate your help. I read the TM 5-6115-585-34 and on page 6-8 the directions say to adjust resistor R15. Does anyone have a picture or a good description as to where resistor R15 is...
  20. D

    what size door in shed for a deuce

    I would make the door big enough for a five ton.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks