Search results

Man if I had a vehicle like that when I was 21 , I would be divorced at LEAST 3-4 times by now !!!! LOL

Welcome to the "OD" INSANITY !!!!! LOL , [thumbzup]

And the guy with the red Chevy pickup thought he was COOL !!! LOL , MV's drive the CAR people NUTS ! Love it , way to go , BTW , should have one First place ! Bob k

Love going to "CAR SHOWS" it drive the Corvette/Camaro crowd NUTS !!! LOL:tank:

streetgliderx . yes indeed , old Waterloo , family is from there , what can I say , got STUCK in the northern branch of the tree . We are due for a Bama trip come spring .

Yes , a fork lift is the right tool to move around those 395's . I used the folks on the my JD and a tire dolly , much easier ! I will have to stop by next time I visit the family in Waterloo .

Like Your "JACK" , 395's make a big difference in the ride quality . Looking good !

I like it ! nice old dozer . Did you get it running ? Plan on restoring it ?

Put some heat on the HINGE and PIN ( USE A SMALL WELDING TIP ) and the pin should come out , then I drilled out the hinge oversize and used a 5/16" bolt and lock nut . Little 383 green and good as new .

Kinda walked into the winch , happened to hit GL on Black Friday , got 40% off the list price , could not pass it up . I measured the winch and frame and probably have to add a few inch's to the frame , then plan on a 3/8" steel plate between the rails . The kit came with a fair-lead roller ...

Picked up my winch and frame extensions so I can install the winch , soon as the weather clears . I plan on installing one of the 24 volt Warn winch's , appears to be a pretty hefty unit . For ME the 24 volt is the way to go and I got some real good info using the search function on this site .

Installed new drivers door pins , R&R and painted the mirror brackets , and installed my new nifty LOCKING door handles . Just about done for winter .

I LOVE IT , way to go !

That is exactly what I was going to do , I picked up some nice Alloy 5/16" shoulder bolts from McMaster-Carr . I will drill them out , and use LOTS of NEVER SEIZE on the bolts ,should help tighten the hinge up also .

I am looking for the pins for the west coat mirror setup , I picked up some shoulder bolts from McMaster-Carr , should work ok , slightly oversize , which is good for a worn hinge.

I am in the process of replacing door hinge pins , glad they invented a flame wrench , LOL Heat them up and they come right out . Now just have to find the right pins .

Put in 2 new Interstate 6TL's in my duce , plus new cable ends . Starts like NEW ! LOL . It had 2 Exide's that were only 4 years old . go figure . Local Interstate dealer gave me a good price on the Batteries , also said he gets Blem's from time to time .

Painted the poles and brackets for the convoy lights . I think I have all the bits and pieces , could use somebody with access to a water-jet , the round disc that come with the kit are 11" could use a 8" disc . My strobes are smaller that the old revolving lights . I still need a bunch of...

VERY NICE Eagle4g63 , looks VERY good , bet you are glad that is behind you ! job well done .

BURN IT OFF !!! , really , you just need to heat up the epoxy with a torch , I used a rosebud , and then use you basic BFH and give the air ring a few whacks , it will fall right off . Then I used a flap wheel to clean up the axle housing , good to go as they say . Then just get a plug for the...