-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Dead pilot's latest activity
-
Dead pilot replied to the thread Dead Pilot's M38a1 .So the brakes are done which is good progress. So I moved on to the fuel system. The carb was clean and dry so that was easy. But that's... -
Dead pilot replied to the thread Dead Pilot's M38a1 .I was finally able to get the rear hubs off. I bought a second puller and combined the two so it had five legs. Then got the big hammer...
-
Dead pilot replied to the thread Dead Pilot's M38a1 .I was using a hub puller. It ended up braking a leg. I'm guessing the one I had laying around was a cheaper one. Sent from my...
-
Dead pilot replied to the thread Dead Pilot's M38a1 .Unless I missed something in the TM I didn't see anything about the other end of the axle to remove the hub. It just say to remove the...
-
Very cool acquisition! Keep the mis-match paint! Shows character. A lot of the pieces looks nicely original and usable / re-storable.
-
Dead pilot replied to the thread Dead Pilot's M38a1 .It had shoes and everything in the drum and it all was free and moving. Don't know if the wheel cylinders were any good though. I was...
-
Dead pilot replied to the thread Dead Pilot's M38a1 .Current state Sent from my SM-S918U1 using Tapatalk
-
Dead pilot replied to the thread Dead Pilot's M38a1 .I was able to take the drums off the hub Sent from my SM-S918U1 using Tapatalk
-
Dead pilot replied to the thread Dead Pilot's M38a1 .And today was a set back. Rear hubs don't want to come off. They spin so I know the shoes aren't stuck but no luck with the hub puller...
-
Dead pilot replied to the thread Dead Pilot's M38a1 .Well there's no plate there. Looks like it was removed when they were doing whatever they were doing Sent from my SM-S918U1 using Tapatalk
-
. Wow! It looks for the most part that it is unmolested... Congratulations on getting it onto a trailer and to your place. .
-
Dead pilot replied to the thread Dead Pilot's M38a1 .I was just going off what I was told. It doesn't have any data plates on her. I don't remember if there is frame marking on these to...
-
I ended up with a new rescue this month. Got my hands on pretty clean 52 M38a1. Looks like someone started to restore but stopped. All...
